Page 3 of 17 FirstFirst 12345613 ... LastLast
Results 21 to 30 of 168
  1. #21

    Default Re: Need advices in building my rig

    aprub bos earl!

  2. #22

    Default Re: Need advices in building my rig

    2500 raman siguro sa i5. Ok ra gamay ra'g ligas

  3. #23

    Default Re: Need advices in building my rig

    Quote Originally Posted by archt_vin View Post

    VC: gamit nako karn kay a decent low to mid gaming card (GTS 250 1GB GDDR3 256bit GREEN EDITION), so far payter ra man.

    ADVICE sa set up:

    ok ra imo set up boss kani lang ako ika tampo:
    1. if mag i7 2600 ka go for the K, pwede ra sad i5 2600K(quad core)
    2. pilia ang mobo (LGA 1155) na 16GB max ang kaya na rams nya if budgeted gyud start lang sa sa 4GB ram para maka 64bit Os na ka daan, then upgrade to 8GB then max out to 16GB dayun para mas pas pas pa jud.
    3. pwede ka mag add pa HDD?...500/500 dayun gamiti RAID (patudlo ni boss butitoy ani na butanga kay makatabang ni nimo if ingunani-0n nimo.
    4. VC, as per bos werty said, mas maau jud ang pang workstation na VC pag ingun ani na mga buhaton kay mas maau ang performance ug output pero if budgeted jud, pwede ra man gaming card imo gamiton na vc. mid to high gaming vc, nindut na kaau na. 2gb GDDR5...whew.


    subscribed
    hehe salamat sa reply bay...

    regarding sa imung mga advices pud bay, mas better kung sa i7 2600 nalang ko kaysa sa i5 2500K, they're both 4-cored processors but mas higher ug # of threads ang i7, 8 against 4, which is when it comes to rendering daku kaug tabang...

    sa Mobo, naa koy nakita sa pcx. (online) kini Asus P8H61-M(B3) LE H61 V/S/GL
    ok naba ni? 2 slots lang noon para sa memory but it's cheaper compare sa Gigabyte H67M-D2-B3 V/S/GL nga 2 slots jpun LGA 1155 supported... which is better? ok ra pud 4gb RAM lang sa then upgrade lang daun...

    sige ako lang siyang i PM regarding aning 500/500 ... kay murag wa koy alamag ani hehe

    sa VC, unsa man nindut nga VC? ok lang sa ako bahala dili lang sa 2gb... 1gb lang sa karun then upgrade lang dayun ko...

    Quote Originally Posted by EarlZ View Post
    If TS has no plans to overclock at all the 2600 non K series is fine, also i7 ang 2600 series.
    yep, no plans to OC as of the moment...

  4. #24

    Default Re: Need advices in building my rig

    *Asus P8H61-M(B3) LE H61 V/S/GL - is a lower version chipset for SB. has no USB3.0 and SATA 6GB/s support
    *yup, i7 would be a better choice, u could go for that instead of i5 for performance reasons. also its built-in videocard on SB is a no push-over unlike some of intel's other embedded solutions. try lang... makapalit ra btaw ka gihapon later ug videocard kung need na jud.

  5. #25

    Default Re: Need advices in building my rig

    Quote Originally Posted by werty View Post
    *Asus P8H61-M(B3) LE H61 V/S/GL - is a lower version chipset for SB. has no USB3.0 and SATA 6GB/s support
    *yup, i7 would be a better choice, u could go for that instead of i5 for performance reasons. also its built-in videocard on SB is a no push-over unlike some of intel's other embedded solutions. try lang... makapalit ra btaw ka gihapon later ug videocard kung need na jud.
    ahhh i see, thanks sa info sir werty/ i'll go for Gigabyte H67M-D2-B3 V/S/GL and paired it up with Intel Core i7 2600 and ulahion lang nako sa ang VC...

    so far this is the system, weekend nalang akong gihuat arun makapalit nako ay

    Proce: Intel Core i7 2600
    Mobo: Gigabyte H67M-D2-B3 V/S/GL
    Memory: Kingston / Corsair 4GB 1333 DDR3 usa lang sa as for now try nako
    HDD: 500gb Western Digital SATA 3.0
    ODD: Lite-On 24x IHAS-224/524 Sata LS/LT
    PSU: Silverstone ST50F-ESsentials 500w 80+
    Chassis: AeroCool VS-9 Black


  6. #26

    Default Re: Need advices in building my rig

    2x4gb or 2x2gb lang bos para dual channel na

  7. #27

    Default Re: Need advices in building my rig

    Quote Originally Posted by archt_vin View Post
    2x4gb or 2x2gb lang bos para dual channel na
    ok bosing! wai problema sa 2x4gb, pasok pa sa budget... salamat!

  8. #28

    Default Re: Need advices in building my rig

    @master guru archt_vin
    kani akong pangutana master:

    if knhanglan jud daghan ka.u ang ram mas maayu diay mag x58 or sandy lang gyapon? Kay ang x58 tri channel mangud and daghan slots para ram.

  9. #29

    Default Re: Need advices in building my rig

    any of the two would do. x58 and p67 (1366 or 1155). most of the problems would be the availability of the item.

  10. #30

    Default Re: Need advices in building my rig

    d na guro kinahanglan ui...payts ra na pag naa ka max na rams nimo as of now...kung ganahan jud ka, pagtukod ug render farm

Page 3 of 17 FirstFirst 12345613 ... LastLast

Similar Threads

 
  1. Need advices in building Mini-ITX..
    By iamyel in forum Computer Hardware
    Replies: 6
    Last Post: 01-13-2013, 09:54 AM
  2. Guys I need your suggestions in building my friends rig
    By rexsavellon in forum Computer Hardware
    Replies: 27
    Last Post: 09-15-2011, 03:09 PM
  3. Need Advice in building a desktop
    By jubanz in forum Computer Hardware
    Replies: 11
    Last Post: 09-07-2011, 08:08 PM
  4. I need advice on building my PC
    By shinngakkusei in forum Computer Hardware
    Replies: 3
    Last Post: 07-03-2011, 10:08 AM
  5. need some advice in building a new pc
    By acegear in forum Computer Hardware
    Replies: 24
    Last Post: 09-11-2009, 01:23 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
about us
We are the first Cebu Online Media.

iSTORYA.NET is Cebu's Biggest, Southern Philippines' Most Active, and the Philippines' Strongest Online Community!
follow us
#top