Need advices in building my rig

[Sandvich]

dude i dont think theres a xenon procie thata cheap...14 ra with a mobo...

i have a xenon procie, and mobo nya its hella expensive.... procie daan is 18k na daan.

kindly post link sir..so i could check..maybe thats a low end xeonon.but xenon proice is powerful jud....i doubt..

https://www.istorya.net/forums/comput...z-8mb-95w.html

... it`s 16k not 14k pero wa man pud ni ingon si Rainerius na sure cya.

[arki.gerbz]

heres my initial suggestion based on what specs u want and budget:

NOTES:
*Prices are based on PCX list. not sure if all items listed are available @ local outlets.
*no monitor included.
*no dedicated videocard - use the built-in for now and if u think its slow for your needs, then u can upgrade it later.
*psu is non-modular to keep cost and for me its enough for single-vga card setups. selected coz of better warranty and is the cheapest certified 80+ on pcx list.
*some parts can still be changed depende lang sa imo other needs. i only suggest here a basic setup with not so much added features.

thanks ani bay, at least naa nkoi basihan, anyway regarding sa proce nga i7 2600 murag naa koy nakita nga lower sa 14k, murag 13k mn ata to, dayun ang 2600K mao ang 14k... bisitahun ko lang ng PCX karun weekend...
murag need jud ko ug videocard ana, kay importante kau pud na when it comes to viewport navigation. but having a quote of 30k for this setup, i guess adding a videocard and a PSU would much likely increase the price up to 40k no?

[arki.gerbz]

40K ani payts na..

lage, ako nalang increase ako budget... thanks

[werty]

thanks ani bay, at least naa nkoi basihan, anyway regarding sa proce nga i7 2600 murag naa koy nakita nga lower sa 14k, murag 13k mn ata to, dayun ang 2600K mao ang 14k... bisitahun ko lang ng PCX karun weekend...
murag need jud ko ug videocard ana, kay importante kau pud na when it comes to viewport navigation. but having a quote of 30k for this setup, i guess adding a videocard and a PSU would much likely increase the price up to 40k no?

decent naman ni na PSU for most needs on a single-vga card setup, unless ull be overclocking or using the lastest videocards, then u a higher wattage psu.

[arki.gerbz]

decent naman ni na PSU for most needs on a single-vga card setup, unless ull be overclocking or using the lastest videocards, then u a higher wattage psu.

ahhh i see... so for the videocard, unsa imung ma i ka suggest?

[blizzaga4]

Try to PM Archt_Vin kay xay master sa mga ing ani.......

Don't spend too much on gaming cards. Pero you still have to get a video card coz hinay kaayu ang preview while your creating models if mu gamit ka sa motherboard IGP. Focus on your processor and ram coz that's where the real time rendering occurs....

And according to master Archt_Vin naa kunu daw bag.o version sa Vray na mugamit ug GPU. When I checked their website it's true but I haven't tested it personally.

By the way have you tried using Blender?

[arki.gerbz]

Try to PM Archt_Vin kay xay master sa mga ing ani.......

Don't spend too much on gaming cards. Pero you still have to get a video card coz hinay kaayu ang preview while your creating models if mu gamit ka sa motherboard IGP. Focus on your processor and ram coz that's where the real time rendering occurs....

And according to master Archt_Vin naa kunu daw bag.o version sa Vray na mugamit ug GPU. When I checked their website it's true but I haven't tested it personally.

By the way have you tried using Blender?

thanks, i try lang nako siya PM run. lage kailangan jud ko ug vcard jud kay naka experience nako sa performance kung integrated graphics lang.

VRay 2.0 na siya, sa max ug maya, ala pa nun pud ko ka try ana.

I've heard about Blender pero wala nako ng try, focus man kos 3 ka software gud...

[arki.gerbz]

mao ni ang system as suggested:

Processor : Intel Core i7-2600 (3.4G) 8mb 32nm
Motherboard : Gigabyte H67M-D2-B3 V/S/GL
Memory :2 x Kingston / Corsair 4GB 1333 ddr3
Harddisk : 500gb Western Digital SATA 3.0

Videocard : ? ? ?

Optical Drive : Lite-On 24x IHAS-224/524 Sata LS/LT
Power Supply : Silverstone ST50F-ESsentials 500w 80+
Casing : AeroCool VS-9 Black

so far ala koi question sa mga naka bold
vcard nalang...

if naa mo other suggestions please don't hesitate to comment... thanks! kay arun masugdan ko nag build karun weekend..

[archt_vin]

Good day sir!

Pls dont sir me, hehehe same ra ta dri brad.

about beeing an expert, am not close to one, honestly. si blizzaga ray gabuot2 ana. bag-o ra sad ko nakat-on aning building rigs and computer components knowhows mao na am no expert. ganiha gali, naratol ko kay dili mo POST ako pc, gikan ra sad ko nakaton bag-ohay ug overclocking mao na kulbaan ko basin naunsa na ni ako pc. so nag patabang ra ko sa uban kaila nako na enthusiasts dri and salamat kay nabuhi ra gyud intawn na stress ra d i ako ram ug procie matud pa ni zoters (da tuga2 man gud maski noob pa).

tabang lang ko sa kutob s ako makaya brad ahihihih. tinabangay ta dri.


VC: gamit nako karn kay a decent low to mid gaming card (GTS 250 1GB GDDR3 256bit GREEN EDITION), so far payter ra man.

GAMIT sa VC when rendering/animations:
sa ako na obserbahan, ang use sa vc is para klaro nimo ang materials na imo gamiton sa imo pagrender, in my terms crispy tan-awn bah. kay the true components na iya gamiton inig render ug animate kay ang PROCESSOR ug RAMS. mas maau gyud u have a powerful procie and lots of rams. sa processor kay lami na jud kaau na ang intel sandy bridge (i7 2600K-super lami, i5 2600K- lami sad) kay i bet mo tabang nag pa crispy ang igp sa processor mismo inig render/animate (correct me if im wrong kadto mga renderers na naka sandy dha, gai tag proof hehehe kay dragon platform ra tawn ni ako).

ADVICE sa set up:

ok ra imo set up boss kani lang ako ika tampo:
1. if mag i7 2600 ka go for the K, pwede ra sad i5 2600K(quad core)
2. pilia ang mobo (LGA 1155) na 16GB max ang kaya na rams nya if budgeted gyud start lang sa sa 4GB ram para maka 64bit Os na ka daan, then upgrade to 8GB then max out to 16GB dayun para mas pas pas pa jud.
3. pwede ka mag add pa HDD?...500/500 dayun gamiti RAID (patudlo ni boss butitoy ani na butanga kay makatabang ni nimo if ingunani-0n nimo.
4. VC, as per bos werty said, mas maau jud ang pang workstation na VC pag ingun ani na mga buhaton kay mas maau ang performance ug output pero if budgeted jud, pwede ra man gaming card imo gamiton na vc. mid to high gaming vc, nindut na kaau na. 2gb GDDR5...whew.

kana lang sa ako ikatampo, huwat sa ta sa uban basin naa pa mo critisize ani ako tambag, payter japon ahihihi taasa na d i ani ako post oi ahahhay


subscribed

[EarlZ]

If TS has no plans to overclock at all the 2600 non K series is fine, also i7 ang 2600 series.