Overclocking Intel i7 930

[keropi]

---

Yes, 80-85c is ok but that's for high OCs already like 4.2ghz or around 200bclks. 160bclk is a walk in the park. Some chips dont even require any additional voltage so temps shouldnt increase by more than 10C above temps @ stock settings.

Try kuno test ug prime95 @ default clocks bro.

[odee2004]

okay, i've resetted my BIOS to factory settings. Enabled na tanan mga power saving features as in sa default. So ang Vcore ani kay naka default pud.

Ang vcore nako sa CPU-Z kay 1.160 V
BCLK: 135 Mhz
multiplier: x22

Temp(using realtemp)
75/72/72/72 -> Prime 95 for 9 mins (blend)

[werty]

wew! taas ra daan temps...

[keropi]

Taas gud temps nimo TS. Reseat kuno ang cpu block ug magbutang ka ug lain nga thermalpaste..
Or basin wala nituyok ang pump sa Kuhler?.. basin lang..

[odee2004]

hmm actually mas bugnaw ni karon kaysa sauna mo abot 90C akong temp kung mag prime95 using stock intel HSF.

Nagwork ra man siguro ang pump since init ang exhaust sa radiator though di ko sure coz this would be my first time using liquid cooling. DI sa nako i-remove ang cooler kay wa pa ko thermal paste.

Naa ko changes so kini ang temp karon:
1. Removed intel turbo mode (kalimot ko tang2x)
2. Increase qpi/uncore voltage to 1.66V from 1.62V

Temp:
70/66/68/66 @ 12mins prime 95(blend)

[street_of_no_return]

odee kana imong Temps ba IDLE rana or FULL LOAD.? init ra kaau na boss. 59c-67c (full load) kani okey-okey rani nga temp.

[street_of_no_return]

boss pa electric fani na imong CPU boss kai init na kaau ang board ana sure gyd ko.

[odee2004]

Full load temp na using prime 95.

Kung naka enable tanan akong power saving sa BIOS kay ang idle temp niya low 40s. Karon mga 50s ang idle temp kay naka off man ang power saving options.

Init jud kaayo akong room gud, naa pa gyud ko 2nd floor then atop na ang sa taas. Ganiha 2am kay 70C ra ang max sa 100% load then karon ning abot 73C na ang max load kay init naman.

Usa ra akong fan diri and naka atubang sa akua. Mo balhin naman ko palce this december and kanang naay aircon ako pilion para ig weekends makatug ko tarong.

Thanks sa inyo mga reply!

Kapoy diay ni OC oi kay sige huwat then fail pa gyud sa prime95. tsk tsk

[keropi]

Dont be frustrated TS. Di na tungod sa ambient temp nimo. Supposed to be, bisan pa dili aircon imong room, temps should not reach those levels because you are using watercooling. Temps should be somewhere near 60C and that's just on aircooling..


My guess is that either wala nataud ug tarong ang cpu block, or you have a lemon of a procie

[werty]

init ra jud imo stock temps. no room na for decent overclock............