Msi p45 neo2

[reishoto]

---

try sa auto ang ram sa bai, ddr2 1066 would normally run then at 800, see if it can go 3.2G.

[poldopunk]

murag okay naman guro ni ako nalang prob kay deli nako magamnnit ang 1066 sa akong mems 1066 nalang unsaon kaha ni nako sa do i need to increase voltage sa akong ram.....

gamiti ug memory divider/multiplier. atong kwentahon ha kung unsa dapat gamiton. huwat sa.

**edit**

pwede paki post imong available nga memory dividers or multipliers para dili ko magmano mano ug kwenta sa ratio.

[kabz]

bro lamat kaau anhi nalang guro kutob 3.2 21%oc'd lang na nani running stable naman.... kuyawan nako isaka pajud hehehehehe.... sakto ra guro 3.2 sa ako lamat kaau bro @poldopun,reishoto,dmelsie and Earlz ahak kat-on noon kog ahat aning oc2x hehehehee.... suya man gud ko oc2x mao ako nalang try nakat-on rapud kadugayan........

mao ni pic.....




CPU-Z Validator 3.0

[simoko]

@ kabz: i suggest that u get the limits first sa imong system...@ stock voltage pilay man max OC imong makuha? which of the four cores is the weakest(this will be your limiting factor sa pag OC)?

from there...u start playing w/ ur voltages in the procie, pll, gtl, nb & rams to further increase the speed.

[Mildseven]

yeah.. up 1 notch sa imong vcore.. pede ra ulahi ang RAM.. vcore ppl gtl and nb.. 1 notch lang everytime.. then test.. sure ko u'll hit higher

[kabz]

gisaka pa nako gamay ang voltage kay na noticed nako na mo crash siya after
3hours running testing it with orthos now running 1.33 core volt okay raba ni? naka set sa akong bios
increase nako gamay sa mems nako running na pud 1072 ram volt is at 2.0 thanks kaau @simoko and mildseven
doing some more test pa ani.... hehehehe hopefully okay na siya sa 3.2


http://valid.canardpc.com/show_oc.php?id=545285

[simoko]

bai kabz: Orthos can run only on 2 cores...u need to run 2 instances of Orthos to test your four cores kai quadie man diay na...

[kabz]

oo sir 2 cores ra lagi unsaon pag test ani sa 3 and 4th coresss...?

[rhodem24]

halaahh... gi sugdan nang kabzz!!! hehehehe! good luck sa OC.. unya ra ko mu suway2x ani kung nana koy i7.

[poldopunk]

oo sir 2 cores ra lagi unsaon pag test ani sa 3 and 4th coresss...?

you will have to set affinity for the second orthos application. i suggest going for prime95 right away para 4 ka worker threads dayun, you'll know right away which is the weakest core for your GTL/Ref Voltage settings.

Small or Large FFTs para cpu-intensive nga test.