Im using raven 2.. 3 intake 180mm fans 1 120mm out then 2 120mm extra fans for radiator.. kung wala filters yeah limpyo ka sa imu rig weekly.. ahehehe
Im using raven 2.. 3 intake 180mm fans 1 120mm out then 2 120mm extra fans for radiator.. kung wala filters yeah limpyo ka sa imu rig weekly.. ahehehe

ako kay...
6 intake
ug
3 exhaust
intake kay
3-front
2-sides
1-bottom
exhaust kay
2-top
1-rear
hehehe!
1 intake 1 exhaust XD
I was looking at the rest of the article and the GPU portion made me test out my casing, to my surprise my bottom vents are actually are actually sucking air in, If i open my case front door it blows air out now this only happens if my GPU's fan revs up to something like 65%
I tested it with an onion paper/tracing paper.. If it sticks to the vents its sucking air in, if it falls it blowing air out.
I may need a more powerful 140mm fan but im afraid it might add noise.. anyone here in istorya selling good 140mm, pref with clear frame so I can mod the LEDs to white..
check this one.. i've found
Spoiler!
CFD Project | Ben Kowalewski
dali ra kaau ni... sa akoa sa una, open ang both side panels, then deskfan sa pikas sideintake then exhaust sa tanang lungag sa casing.
before: 3 x 120mm fans @ front as intake, 1 x 120mm fan @ back as exhaust
now: 2 x 120mm fans @ front as intake, 1 x 120 mm fan @ side as intake, 1 x 120 mm fan @ back as exhaust
future: 3 x 120mm fans @ front, intake; 2 x 120mm fans @ side, intake; 1 x 120 mm fan @ back, exhaust; 2 x 120 mm fans @ top, intake (or exhaust, haven't decided yet)...
ako kay
intake
front 120mm
side 120mm
exhaust
top 2x120mm
back 80mm
Similar Threads |
|