BSOD while Setup

[chang87]

---

bro, mao ni ang specifications sa imo ocz memory. verify bro na the settings for ur memory is mao ang na detect sa imo motherboard, if not do this manually. especially the voltage which is 1.65 volts@9-9-9-20. ive read somewhere baya na imo motherboard defaults @ 1.5volts only basin mao na d makakaya if mag dual channel na... i got a client with same problem using 2x2gb memory(kingston low-profile mems) and ako gisaka ang volts from default 1.8V to 1.9v to make it stable.this was also a gigabyte motherboard for socket 775...

i manual-set nalang imo memory timings and voltage. and check using memtest86+(makita man na ang timings gamit) before doin anything with windows. mga 3-5 runs of test #5 will do for a fast check. then do several loops complete test sa imo final settings gibutang...

cge bro... ill try that bisan nosebleed ko... wahahah

ill try to check the voltage settings and change it to 1.65v

regarding memtest, palit sa q ug cd-r para mka.burn ko

wish me luck... wahahah

[luwid]

try gamit installer nga naay SATA support... goodluck

[jaez]

try i load optimized setting imong mobo and AHCI mode imong sata