BSOD while Setup

[chang87]

---

di jud xa mu.work in dual channel mode... ataya ani nga ram wui! hmp!

di pjud mu.continue ug install sa win7...unsa problema ani?

dd2 ra xa taman sa 1st window then nothing will appear na dayn... grrr

[werty]

check timings from motherboard, check timing @ voltage of memory chips, check voltage, and test test test... test individually, test in each slot, check with both memory in slot, increase voltage abit.. check check anmd test test test...

ug wala ko masayop, gigabyte has issues with running 2x2gb modules. naa ka kutihon gamay sa bios for it to work.

[bim27142]

try sa kuno og run og memtest86+ bro nga naka dual channel... kung naay error, try one stick at a time... then maybe, different ram slots at a time... something like that

i burn lang ang iso nga memtest86+ unya bootable cd mana ang gawas ana...

[cloud]

di jud xa mu.work in dual channel mode... ataya ani nga ram wui! hmp!
di pjud mu.continue ug install sa win7...unsa problema ani?
dd2 ra xa taman sa 1st window then nothing will appear na dayn... grrr

naka try ko ana bro, ECS gani akoa mobo. murag naa na issue ang OCZ ram. wala man siya error sa memtest.
mao na 2gb lang usa akoa mems ron.

[Krislan13]

i think your motherboard doesn't compatible with your RAM... X[

try kno another brand of RAM like the Kingston or other brand... Ü

or pa WARRANTY na cla! Ü

[bim27142]

unsay part number ana imong RAM bro? naa ba siya sa RAM QVL sa imong mobo?

[luwid]

2 questions: Asa dapit exactly mag BSOD? ug Unsa ni imo harddisk SATA?

[alwaysdrunk]

testingi daw change imo HDD setting sa BIOS. from AHCI to SATA. controller option to IDE. try lang

[chang87]

unsay part number ana imong RAM bro? naa ba siya sa RAM QVL sa imong mobo?

Part#: OCZ3G1333LV2G

2 questions: Asa dapit exactly mag BSOD? ug Unsa ni imo harddisk SATA?

after jud sa "please wait while windows is checking your system" and yes, sata 1TB WD green caviar

testingi daw change imo HDD setting sa BIOS. from AHCI to SATA. controller option to IDE. try lang

cge bro... imma try that

thanks guys

[werty]

4GB (2x2048MB) D/C Kit PN -OCZ3G1333LV4GK

1333MHz DDR3
CL 9-9-9-20(CAS-TRCD-TRP-TRAS)
Available in 4GB optimized kits
Unbuffered
Gold Layered Z3 XTC Heatspreader
Qualified on Intel P55 Chipsets and Core i3, i5, i7 CPUs
Qualified on AMD 7 Series and 8 Series Chipsets, X4/X6 CPUs
Lifetime Warranty
1.65 Volts
240 Pin DIMM

bro, mao ni ang specifications sa imo ocz memory. verify bro na the settings for ur memory is mao ang na detect sa imo motherboard, if not do this manually. especially the voltage which is 1.65 volts@9-9-9-20. ive read somewhere baya na imo motherboard defaults @ 1.5volts only basin mao na d makakaya if mag dual channel na... i got a client with same problem using 2x2gb memory(kingston low-profile mems) and ako gisaka ang volts from default 1.8V to 1.9v to make it stable.this was also a gigabyte motherboard for socket 775...

i manual-set nalang imo memory timings and voltage. and check using memtest86+(makita man na ang timings gamit) before doin anything with windows. mga 3-5 runs of test #5 will do for a fast check. then do several loops complete test sa imo final settings gibutang...