water cooled GPU temps question???

[Jason4eveR]

---

hi guys

regarding my HD5850, ako sya gi-watercooled ang GPU ra then ako ra gibilin ang baseplate para naa heatsink ang memory, VRM og ang PCB.

then mao ni ako question, normal raba ni nga temps sa shader og VRM on 100% load?

kindly open the picture lang para sa full size

[P0w3rM0v3]

unsay cooling system nimo sir?

size of barbs, rad, pump model, and tubing size?

[zoters]

post pic daw jason sa imu watercooled na gpu..hehehe
wana see it..hehehe

[Jason4eveR]

unsay cooling system nimo sir?

size of barbs, rad, pump model, and tubing size?

larkooler kato first na model, 1/8" ang fittings tanan nako.

post pic daw jason sa imu watercooled na gpu..hehehe
wana see it..hehehe

later boss after my class

[P0w3rM0v3]

^^ i think that should be normal for that setup.
also remember that ur running furmark. furmark tends to be the absolute worst that can happen. Actual applications (even the most demanding games) won't ever be as taxing as what you'll see in furmark.

[Jason4eveR]

^^ i think that should be normal for that setup.
also remember that ur running furmark. furmark tends to be the absolute worst that can happen. Actual applications (even the most demanding games) won't ever be as taxing as what you'll see in furmark.

yup, mao sad... mugamit nalang ko HWmonitor ani if mag games ko para makita nako ang maximum temp. jud hehehe

mao diay ni ako loop karun

res > pump > SB chipset > GPU > CPU > rad > back to res

[gaspar_73]

run a game then shutdown quickly.hikapa[component side not the pcb side] after shutdown,it will give you an idea.normal ra na boss kay wala na man guy fan nga makapabugnaw sa memory chip ug vrm..sa ako lang na nga approach ha?

[Jason4eveR]

post pic daw jason sa imu watercooled na gpu..hehehe
wana see it..hehehe

naa ra mga pics boss

sorry noob kaayo pagka-capture sa pics kurog kaayo ako kamot hehehe...

run a game then shutdown quickly.hikapa[component side not the pcb side] after shutdown,it will give you an idea.normal ra na boss kay wala na man guy fan nga makapabugnaw sa memory chip ug vrm..sa ako lang na nga approach ha?

good idea boss, naa man pud HWmonitor na ma log niya ang min og max temp

[zhadlp]

@jason

nice, ni follow ra jud si jason sa akong recommendation, hehehe... very good temperatures bai, VRM temps are well within range.

to prove it, here are temps from a stock cooler:


told ya its a good idea to keep the baseplate as heatsink for the memory/vrm...

[Jason4eveR]

@jason

nice, ni follow ra jud si jason sa akong recommendation, hehehe... very good temperatures bai, VRM temps are well within range.

to prove it, here are temps from a stock cooler:


told ya its a good idea to keep the baseplate as heatsink for the memory/vrm...

hehe, ako jud gi-sunod imo gi-sulti bai hehehe, thanks kaayo ^___^ karun na eliminate najud nako ang red puro na blue, black and white tanan hehehe

normalrajud diay ang temps nako sa shader og VRM heheh

ang GPU og Memory mas bugnaw na nuon hehehe, pero ang shader og VRM same ra japon maybe mag add ko og high cfm fan ani sa front, deep cool wind blade @ 1.3k RPM raman gud na naka atubang na fan dapit sa HDD cage hehehe then wala pud na side panel fan, how much more kaya if ako pa itaud ang 200mm fan sa side