unplug network connection problem

[chill_angel25]

---

Mga Master ask ko Help!..

When i use lan cable direct from the modem router(modem router->lan->pc) it say's local area connection is connected, after 3 to 5 seconds it say's the connection is unplug, hangtog nga mag balik2x na xa. plug, unplug,plug, unplug and so on..
But if i connect the lan cable in another router before the pc lan(NIC)
(modem router->lan->router->lan->pc) the connection is verry normal, no problem at all.
unsa man problema ani?, it is possible that the NIC is defective?, i cant say that the lan cable is defect cuz i used is in normal when i use another router..
whatchathink?..
help
thankx!!

[babolgam]

why not try modem -> router(if there are other ports) -> pc

If ganahan jud ka daghan au then modem -> router -> switch(es) -> pc(s)

[moklo]

Mga Master ask ko Help!..

When i use lan cable direct from the modem router(modem router->lan->pc) it say's local area connection is connected, after 3 to 5 seconds it say's the connection is unplug, hangtog nga mag balik2x na xa. plug, unplug,plug, unplug and so on..
But if i connect the lan cable in another router before the pc lan(NIC)
(modem router->lan->router->lan->pc) the connection is verry normal, no problem at all.
unsa man problema ani?, it is possible that the NIC is defective?, i cant say that the lan cable is defect cuz i used is in normal when i use another router..
whatchathink?..
help
thankx!!

Problemado imong modem router bro kanng dala sa imong plan... connecting it to other router will solve the problem, but your net speed will be less or worst no internet nka... O maulian siya kai lahi nman sad na nga lan connection ang imong gigamit sa router nman na nimo nga usa w/ is maayo pa.

Call your ISP about that problem....

[ethzneuron]

basin nakagamit ka og cross-over bro.. ok rana imo NIC kay mo-work man sa second configuration nimo. try lang.. hehe

[luwid]

your modem router has some problem... check ang iya contact between the cable and your modem router basin muluag kalit...

[babolgam]

modems from ISPs should be auto-sensing(if I'm not mistaken sa term) so pwede ra cross-over or straight through.

[ethzneuron]

modems from ISPs should be auto-sensing(if I'm not mistaken sa term) so pwede ra cross-over or straight through.

yes, thats the norm nowadays.. from modems, switches to routers.

[rkudoz]

try to check the connector, maybe its loose, check the RJ45 connector bro... or uu possible imu NIC ang problema sab....

[moklo]

your modem router has some problem... check ang iya contact between the cable and your modem router basin muluag kalit...

Yes, mao ni sagaran problem jud

[Luther]

kasulay ko ani. ako gi format jud akoa.