i need help on my water flow

[glide 1]

---

pump > res > etc... would just be plain wrong, lol (I'd love to see sum1 try this tho). wouldnt that only yield 0 max. head and possibility of getting air in your pump? if you do this you will most likely ruin your rig and rightfully so for being that ignorant.

P0w3rM0v3 - i hope you are not referring to me as being ignorant, read my post - i said as long as the "res is before the pump" then all is dandy and you should only see very little temp difference at proc temps compared to the rest of your components.

[P0w3rM0v3]

@jason4ever medyo taas2x lang bitaw imo core temps br0. pero under "CPU" ang value kay 30C ra which is good, dunno what cpu your temp sensor is talking about tho.

@glide 1 by all means no br0... on the contrary I am agreeing with you, lol. sorry if I worded my post wrong. was mere speculating what would happen if you put your res after your pump cuz although ala pa ko ka suway (and havent really read up on what would happen if you did so), I have a feeling bati jud ang resulta, thats why naay question mark sa end after I mentioned about air getting into your pump (cuz thats what I think would happen lang). my bad br0. usa bya ka sa ako mga istorya idols, one love br0! peace!

edit: that "ignorant" part was addressed to no one specific in istorya, was basically referring to people (if there are any, and I wouldnt be surprised if there are/were) who are lazy enough to go liquid and not do their research. kun sa bisaya pa, "kun ma guba imo loop tungod ani kay nag pataka ra ka, then gaba!"

[Sasori]

ok raman siguro ni temps nako noh? currently using my old loop wala pa nako giusab

stock settings rani bro? i was expecting 30-40*C in the cores kung nka wcs coz i havent tried it

[glide 1]

P0w3rM0v3 - no probz, peace is my middle name

Would like to point out though that if anyone is running the Swiftech MCP350/355 or the same variants from koolance, etc.. You may want to consider having the radiator before the res (rad - res - pump - cpu - etc). Reason for this is that those pumps generally run a little hotter than say a Swiftech 655, so one would not want the heat coming from the blocks to hit the res - pump directly. I have heard of many failures due to heat on these pumps.

So to be safe, i would go: pump - cpu - chipset - vc - rad - res - pump


Jason - post the clocks you are running the system at. if thats at stock, then it might be a little high.

[P0w3rM0v3]

^^ I be smoking the doob when i post comments sometimes so u can imagine that sentence construction can be a bit of a problem

@TS: possible wala na torong ug butang ang block or thermal paste bro? sometimes it's the little things na ma kalimtan nato. btw, unsay size gali sa rad? pila pud cfm ang fans nimo?

[zoters]

@Jason4eveR

ask lng ko sa coolant mu gamit,,k2 ba na sa shell na coolant?unsa g.sagol ana?

[Jason4eveR]

stock settings?

kung no AC then thats cool.

i think ganyan din yung temps ko for my stock i7 920

non AC room ko stock settings din lahat yan.

@jason: dli na taas imo temps sa core bai? just asking.. lcs naman ka dba?

nahibong gani ko ngano taas ang temps sa mga cores bai pero sa CPU ubos man dapat gani unta mas ubos og temp ang cores kaysa CPU.

@jason4ever medyo taas2x lang bitaw imo core temps br0. pero under "CPU" ang value kay 30C ra which is good, dunno what cpu your temp sensor is talking about tho.

mao lagi bai, ambot ngano ni pero dili man pud init ang CPU block kung hikapon nako.

stock settings rani bro? i was expecting 30-40*C in the cores kung nka wcs coz i havent tried it

stock settings jud tanan bai, ambot naunsa na ang cores temp hehehe

Jason - post the clocks you are running the system at. if thats at stock, then it might be a little high.

CPU: 2.5 GHz stock undervolt to 1.07v from 1.2v sa BIOS

@TS: possible wala na torong ug butang ang block or thermal paste bro? sometimes it's the little things na ma kalimtan nato. btw, unsay size gali sa rad? pila pud cfm ang fans nimo?

ako gi usab ako loop na bai and nabantayan nako na wala jud diay matarung og taud ang CPU block hehehe... i don't know pila cfm basta 1.8k rpm ni siya amd 240mm ang rad.

@Jason4eveR

ask lng ko sa coolant mu gamit,,k2 ba na sa shell na coolant?unsa g.sagol ana?

pm bakwakkwak bai kay ihaya man ni gikan na coolant gihatag nya nako. sya man nag mix ani gud.



mao diay ne temps nako run with this loop

Res -> Pump -> Rad - CPU - NB -> back to res. ako gitang2x usa ang VGA.