is 1.42v too high for cpu vcore?

[Jason4eveR]

---

mine was dili jud mulapas sa 50ºC bisan naka OC to 36% pa, i think sa ambient temp jud na nimo @TS unya wala klaro ventilation imo case.

[Jason4eveR]

undervolted @ stock settings tanan, my room now is very hot, 38ºC idle temp nako karun and i guess 38ºC pud ako room temp kay init man jud hehehe

short test only

[Kibir_Tidibir]

generic ra ang casing ani sir... one 120mm intake and another 1 for outake... im using a corecontact freezer cpu cooler...tsk maybe i'll lower the voltage... aha man ako i-lower, ang cpu voltage? or cpu vdd voltage?

[werty]

bro try to reseat ur HSF bro.. i dnt think normal na imo temps @ stock with aftermath hsf

pila imo case temp? dapat mga 34-36degC na...or below 40degC for the case.

[Jason4eveR]

and don't forget to apply a new thermal paste with a thin coat lang

Tuniq TX-2 is your best choice if you're on a budget but if not get the TX-3 instead

[aztecrevolution]

hahaha nigawas ra jud!!!

@topic.. my temp is around 31C idle(core temp) now. and murag 45(cores) full load.. ang cpu temp kai mu abot ug 60C full load... is that too high?

try reseat sa imu hsf bro then apply new thermal paste if ever uga nah kau.

[Kibir_Tidibir]

bro try to reseat ur HSF bro.. i dnt think normal na imo temps @ stock with aftermath hsf

pila imo case temp? dapat mga 34-36degC na...or below 40degC for the case.

@werty- which one is the case temp bro?



havent reseated the HSF yet.. but i lowered the voltage of the cpu down to 1.184V according to cpuz... cpu temp is now @ 52C... Im running prime95 right now..^^

[aztecrevolution]

nice work..

[Kibir_Tidibir]

nice work..

ako pa reseat ang HSF bai...ty sa mga tips!

[Kibir_Tidibir]

did a stress test with prime95 for 1 hr... ok ra man... ok ra na na 1 hr stress test?