naa bay store diri na offer ug low priced amd64 skt939?

[bim27142]

---

You're so mean EarlZ! I'm regretting I bought my 3200+ at 9100! (

I wish i never opened this post!

me P9,800 sa arctech, dec 2005.........

[bim27142]

just checked rising sun computers manila website, this are the prices now,

AMD64 3000+ skt 939 -------> P5400
AMD64 3200+ skt 939 --------> 6000
AMD64 3500+ skt 939 --------> 6450

AMD64 3000+ skt 940 --------> 5500 --- mao ba ni cya na AM2?
sempron64 3000+ skt940 -----4700

i strongly suggest getting a 3000+ venice then overclock it way past 3200+.............. 3200+ is not a good overclocker (believe me,, im using one)....

[EarlZ]

i strongly suggest getting a 3000+ venice then overclock it way past 3200+.............. 3200+ is not a good overclocker (believe me,, im using one)....

Its all luck of the draw mate.Not all 3000 are better overclockers than the 3200, vice versa.

[Envy 64Ht]

Stepping, Revision..
I have both the 3000+, 3200+ and the 3500+ as well, all sitting on identical DFI boards paired with TCCD modules.
I can't get the first two to run at 2.7Ghz or higher, both can neither run @ 300HTT (FSB), while the third one ran @ a decent 2.7Ghz and can go 3.0 @ an increment of voltage added

The first two has DH-E3 Revision, Stepping 0, while the 3500+ has DH-E6 Revision, Stepping 2..
3000+/3200+ came from a boxed package and the latter third was on an OEM Tray..

3000+ is now running @ 281x9, 1.65v 2.53Ghz (E3)
3200+ is now running @ 250x10 1.65v 2.5Ghz (E3)
3500+ is now running @ 300x9 1.6v 2.7Ghz (E6)

@EarlZ

3700+ San Diego man imu proc sa?
pila naabot nimu clock ana, and pila imu palit?

[king_coy]

mga guys, ok rin kaya if intel 511 ang kunin ko for internet cafe, kay namahalan man gud ang client sa athlon64 setup, basin athlon64 skt 754 na lang.

[EarlZ]

Yes its a 3700+ SD bought it for around 15,600 pag january man tingali. I dont have the time na to overclock these days.. last ko nag overclock was sa AXP nako nga time.