Nvidia Kernel Mode Driver Error

[werty]

---

@werty
if "At Load" you mean, inig boot sa akong PC sa desktop, then mao ning GPU-Z info.




@minimouse
cge ko ug basa sa nvidia forums about ani nga issue. murag padung naman ni sa VC failure. nag libog pud ko if problem nko kay RAM, basin kinahanglan ilisanan. there are some instance that that could be the culprit. but when i tried taking out the VC itself, nagsalig rko sa integrated video adapter, wala man jud mo occur ang error, not even a BSOD or system freeze. i've tried playing WOW at Good Video settings, walay crashes. Usually mo occur sa Warcraft Map Editor every 15~20min, but when I removed the VC wala no BSOD/freezes.

nope. it means na ang GPU is running @ 100% load. run some stress test programs, FurMark will do and do the screenies after it has run for awhile...

[MartinShortz]

wokay. brb


Edit:

Ran furmark Stability test for at least 15min. During the course, wala mu crash during the test. So, does that mean OK ra akong VC? I read that info from the website provided below. Ran a 1min Benchmark test. Screenshot posted below.


Thank you kaayo bro sa inyong mga replies.

Test Your Graphics Card Stability with Furmark [Gaming]

[MartinShortz]

Update!

Tried a known good video card. Same spec 9500gt 1gig ddr2. All my games worked fine. *Sigh* Time for a new video card.

</thread>

[werty]

wew! hope this is not another Inno3d 9500gt going down the drain.. daghan na kaayo ingon ani for no reason dah.. is Inno3d at fault?

[MartinShortz]

Daghan pud bitaw ingon nga ang 9500gt bati daw especially sa mga hardware geeks sa nvidia forums. Im planning on getting Nvidia 9600gt 512mb ddr3. I hope it's compatible with my mobo, GA-G31M-ES2C.

[werty]

wew! almost a 100degC during load? no wonder nag problema ni in the 1st place.

try to reseat the hsf sa imo videocard and replace fresh coat of thermal paste