Lost Drivers

[romano2717]

---

guys, patabang unta ko unsaon nko pg install sa akong mga drivers (mobo,video,audio, network)
kay ng reformat ko sa pc nko kaso ang mga installers nko para sa mga drivers kay nangawagtang
na, cge nko search og paagi para lng ma ilhan ang model sko video, lan og audio, malas mn jd.
kamo unsaon ninyo pg install sa inyo mga drivers kung na wala na inyo mga cd?

[stealthghost]

first to identify is,
the "BRAND" of your hardware.
next, look for the Model number of your hardware.
if wala, try an IC name or serial numbers i-search sa google.

mostly, sa mga karaan na nang serial numbers or IC parts nga wa jud indication..
you'll get your drivers right away from identifying the brand and model of your hardware..

[romano2717]

thanks sa reply.. that's the problem, I cannot look inside my system unit(tapolan lng cguro kog ukab)ehehehe.. naa bay laeng way like download lng kog software para cya na mo identify
sa mga brands and models sko hardware? if wala, aw ako nlng jd ukbon.hehe

[wowieG]

download CPU-Z its' free..run it. it will give something to start with.

[chriztophers]

bro type dxdiag sa run... Then makita nimo dira unsa imo mobo and model.... then mao na pangitae ug drivers sa net...

[PR0CESS0R]

If branded, naay nakabutang sa sticker. Basaha lang unta nga model para adto ka sa ilang official website mag search.

If clone, download ug cpu-z or ukbon jud nimo ang casing para makita nimo unsay model sa motherboard then download all drivers needed.

hope it helps...

[Htennek]

download everest home edition. it will do the trick. unaha imong lan para maka net ka. nya download naka sa pc.

here's some screenshots

[jodencio]

guys, patabang unta ko unsaon nko pg install sa akong mga drivers (mobo,video,audio, network)
kay ng reformat ko sa pc nko kaso ang mga installers nko para sa mga drivers kay nangawagtang
na, cge nko search og paagi para lng ma ilhan ang model sko video, lan og audio, malas mn jd.
kamo unsaon ninyo pg install sa inyo mga drivers kung na wala na inyo mga cd?

1. do you have an internet access on another computer?
2. if not then i suggest you boot your computer first and check if you can see the bios startup. if possible hit the setup key and then write down the version or board serial. usually its bios model identifying the board of the computer.
3. check the lan card if its built in at the back of the computer. if it's on the slot then its a separate one. if its on the board much better.
4. if the board is on the slot at the back when you boot the computer the lan card model also shows up so write it down.
5. you need a flash drive to go to another computer to download first and foremost the lan card driver. if you don't have internet access its useless.

.. if your computer can access the internet then get the board model from the bios start up and you can google the drivers from there. ... hope this helps

[werty]

the easiest way to to solve your problem is to open up your casing and get the model number of your motherboard.. but since tapulan man ka just for that, i dont think any suggestion would be of help here...

[romano2717]

ako nlng gi ukab ako system unit.hehe.. okie na ako pc.. thanks sa suggestions guys.