need help with PLDT Alcatel ADSL Home ++ 500 modem

[quasimodo]

---

OT: kaluoy pod nimo bro. ayaw nalang pailis kung way blema nang imong modem.

up. need help for the configuration badly.

[Apocalypse]

na kontento naman lang sd ko bro kay pag adto nako ginaha sa PLDT gi config man nila na mahimo na sya og modem router karon wala nko magamit og Router

[oenone]

@quasimodo


bai pareho man ta ug modem pero sa ako wla naman ni configuration pag taod nako dritso naman ug gamit.

[Apocalypse]

na config na cguro na da-an sa PLDT imo bro

@threadstarter

bro dad-a nlng na imo modem sa PLDT office den ipa config nila

[quasimodo]

@oenone: bro, pakicheck daw ko sa imong config sa 192.168.1.1. tan-awa daw sa WAN section kung unsa ang mga nakalista nga VPI ug VCI nga naay PPoE. try nako sunod then if dili gihapon mo-connect, then i have to bring this to PLDT nalang as what Apocalypse advised. matsalams daan.

[ridney]

Try daw ni bai, mao ni default sa akong modem. just save this into a .conf file and upload to your modem.

<psitree>
<ADSL/>
<AtmCfg>
<initCfg structureId="2" threadPriority="25" freeCellQSize="10" freePktQSize="200" freePktQBufSize="1600" freePktQBufOffset="32" rxCellQSize="10" rxPktQSize="200" txFifoPriority="64" aal5MaxSduLen="64" aal2MaxSduLen="65535"/>
</AtmCfg>
<AtmCfgTd>
<td1 cat="UBR" PCR="0" SCR="0" MBS="0"/>
</AtmCfgTd>
<AtmCfgVcc>
<vccId1 vpi="0" vci="100" tdId="1" aalType="AAL5" adminStatus="up" encap="llc" qos="disable"/>
<vccId2 vpi="0" vci="32" tdId="1" aalType="AAL5" adminStatus="up" encap="llc" qos="disable"/>
<vccId3 vpi="8" vci="35" tdId="1" aalType="AAL5" adminStatus="up" encap="llc" qos="disable"/>
<vccId4 vpi="0" vci="35" tdId="1" aalType="AAL5" adminStatus="up" encap="llc" qos="disable"/>
</AtmCfgVcc>
<SecCfg>
<srvCtrlList ftp="lan" http="lan" icmp="enable" ssh="lan" telnet="lan" tftp="lan"/>
</SecCfg>
<Lan>
<entry1 address="192.168.1.1" mask="255.255.255.0" dhcpServer="enable" leasedTime="24" startAddr="192.168.1.2" endAddr="192.168.1.254"/>
</Lan>
<SystemInfo>
<sysLog state="enable" displayLevel="ERR" logLevel="DEBUG" option="local" serverIP="0.0.0.0" serverPort="514"/>
<sysUserName value="admin"/>
<protocol autoScan="enable" upnp="enable" macFilterPolicy="forward" encodePassword="enable"/>
</SystemInfo>
<RouteCfg>
<ripGlobal state="disable" ripIfcTableSize="1"/>
<ripIfc tableSize="1">
<ripIfcEntry id="1" name="br0" state="disable" version="2" operation="active"/>
</ripIfc>
</RouteCfg>
<SNTPCfg/>
<ToDCfg/>
<wan_0_100>
<entry1 vccId="1" conId="1" name="br_0_100" protocol="BRIDGE" encap="LLC" firewall="disable" nat="disable" igmp="disable" service="enable"/>
</wan_0_100>
<wan_0_32>
<entry1 vccId="2" conId="1" name="br_0_32" protocol="BRIDGE" encap="LLC" firewall="disable" nat="disable" igmp="disable" service="enable"/>
</wan_0_32>
<wan_8_35>
<entry1 vccId="3" conId="1" name="br_8_35" protocol="BRIDGE" encap="LLC" firewall="disable" nat="disable" igmp="disable" service="enable"/>
</wan_8_35>
<wan_0_35>
<entry1 vccId="4" conId="1" name="br_0_35" protocol="BRIDGE" encap="LLC" firewall="disable" nat="disable" igmp="disable" service="enable"/>
</wan_0_35>
</psitree>