mobo monitor

[yugi]

---

@fredrich64: wa jud ko kasabot ana bro sorry kaayo. Mine is HEC Raptor 500W w/ dual rail 12V. Pwede pasabton ko nimo bro about sa mga values etc..

[fredrich64]

hmmm ani na bro. ang 12volt rail kay mao na ang pinaka loaded nga rail, mao na ang nag supply ug power directly to ur CPU, Video card, etc. since it is "12"volt rail, or 12v, it's normal value is 12.000volts. now, its imposible man nga mu stick ra jud na siya sa 12.000volts all the time kay electric current man na nga nag dagan, so give it + or - 5% as an allowance, so it means nga if sa imung monitoring kay ang +12v nimo ang readig is +11.9, it is still considered as fine, even if it is 11.4v, still fine gihapun cos it doesnt exceed yet sa standard maximum allowance nga gi hatag for flactuations sa mga railings. so it means nga if lets say ang imung 12v rail kay ni drop to 10.500, then thats dangerous na becos thats low votage na and it could damage ur hardware, like cpu's etc. thats why naay monitoring softwares, para makita nato if naa pa ba sa tolerable level ang flactuations sa mga railings sa atung psu or not.. just an example sa akung raptor, when my pc is idle, ang reading sa iyang 12v kay 12.360, then if e stress nako akung pc, loaded with heavy programs, the reading drops to 12.300, means there is a factuation when it is load, its normal ra jud,, as long as it doesn't drop to 10.9v, something ;p

[zhrike]

dili kaha sa PSU ni nga prob?

[fredrich64]

dili kaha sa PSU ni nga prob?

he will know when he will be able to determine if faulty ba ang iyang monitoring software or not but again, what can we expect with a generic psu

[yugi]

@fredrich64: hahahayy nakasabot najud ko noob kaayo ko ana bro...thanks kaayo sa imong pag explain naka help. Ako man nuun murag ang @TS ani hehehe.. btw mine is HEC RAPTOR 500W I think its fine...

Pero sa ako gi pakita nimo bro ok ra jud akong voltages??

Thanks

[fredrich64]

@yugi, bro, i had a raptor too.. and my +12v kay 12.360, and yours kay 12.1v , means yours is closer to 12.0, ;p ..means the closer to 12.0 the better, so 12.1 is better than mine 12.36 ;p .. and just like what i have said, 5% down or up is the acceptable value, so it means nga ang 11.4v nga reading sa 12.0v is still acceptable . unsa pa other questions ninyu bro, about psu.. im bored ryt now, heheh

[jopakal]

@fred: salamat au sa info...

ok palit nalng kog brand new ATX PSU kanang 500wts or mas taas pa...
ingkaso lng mag upgrade ko sa ako pc

[spookey]

your +3.3 should only be between 3.135 and 3.465. anything outside those values means your PSU is faulty.

[Pete23]

your +3.3 should only be between 3.135 and 3.465. anything outside those values means your PSU is faulty.

yes thats it that's - and + 5% of the normal value ..so anyone who wants to check their reading may need calculator.. hehe or just memorize the tolerable values

[yugi]

your +3.3 should only be between 3.135 and 3.465. anything outside those values means your PSU is faulty.

What you mean bro faulty akong PSU diay?

Voltage Values
CPU Core 1.30 V
+3.3 V 3.31 V <----mao bani imo pasabot?? let me know...
+5 V 5.12 V
+12 V 12.10 V
+5 V Standby 6.83 V
VBAT Battery 3.31 V