Error Loading Operating System

[darkdevil]

---

ako na gibuhat..ala gihapon...error gihapon...

[windox]

uhmm ngano kaha...ako ma huna2xan lang pre...imo bios dli tali mo support sa capacity sa imo hdd...sure ka latest bios revision paras imo comp gamit nmo?

[Lunch]

what's ur setup?

wd on master, primary?
cdrom on master, slave?

There is an issue with wdd drives nga you have to set them up properly. .. i give you the link later.

But i tried also with an ecs board before nga gibutang sa secondary ang cdrom kay mo error kung ibutang as slave sa hdd.

dunno. . . try lang bro but i don't think it is the bios (unless ecs gave an update) because this is an nforce 3 board. . . mobasa man gani ang nforce2 unsa na kaha ang nforce 3. . .

[Lunch]

samot na wala labot ang hdd pre...dli mo detect ug wala ma mao setting sa jumper


testingi daw adto sa bios nya i change ang chs mode sa lba mode

It's different with Western Digital drives pre. . . hdd has a lot to do with it.

Read this link.
http://www.dfi-street.com/forum/showthread.php?t=21249

[darkdevil]

here's the set up

WD-----> primary master
Cdrom-->secondary master

[Lunch]

try to put the cdrom sa primary slave or secondary slave.

set the western digital jumpers properly.

you might have to reinstall windows from scratch.

[butitoy]

sir. if mo install ka new hdd. and run new os on it. be sure to make ur bios know that its there.( press delete as u boot. and configure it there. if it a sata, eide. etc..)


i think that just the problem.

and the other is that. wen u install the os on ur wd 80 gb. it was a slave to ur samsung 40gb. maski its bootable cd install or ne install in xp gui environment. it wud still be d same. error!

so u really have to install it all over again.

set ur 80gb as pri master. us cdrom as secondary master. ( pwede ra pud slave sa pri master. but separate is the optimum setup )

i can bet ur hd is just olryt.
they say format the drive c: again,and with my reccommendation of hdd setup. that wud run.