How to solve this

[simoko]

---

wala nai buzzer ang K9N Neo

[VampyR]

pwede nimo ma testing imong mobo with other parts?

[ethzneuron]

cant boot, black screen?

pwedi pod lcd/crt.. vga connector. check pod psu & last mobo.

[limes]

bro mao pa pag ka guba ani or wa jud ni andar since mao pa pag porma nimo ani na system? better go to your warranty shop before maka void ka ug warranty.

[sphinxx143]

warranty sa na bro take the advantage of using the warranties of your pc

[sentry_03]

bro maau cguro e check ang voltage sa imong powersupply

[redline]

@all:

Salamat kaau sa inyo tubag mga bros. but I already anticipated your advise. about sa warranty ky wla na ky almost 2 yrs na..

ako lang pangutana ky kinsa nka sulay og flash sa bios nga black screen na?

[vipvip68]

@all:

Salamat kaau sa inyo tubag mga bros. but I already anticipated your advise. about sa warranty ky wla na ky almost 2 yrs na..

ako lang pangutana ky kinsa nka sulay og flash sa bios nga black screen na?

I've tried flashing the bios of a seemingly dead board.... but that was a long time ago.

I had an ECS K7S5A (Socket A) pa.. Made the mistake of flashing it with a modified bios.

I researched about the board and found out that you can download the firmware and set it up in the floppy drive. When I turned on the system, it automatically flashed the bios from the floppy.

Try researching your board on how to do something similar.

[redline]

I've tried flashing the bios of a seemingly dead board.... but that was a long time ago.

I had an ECS K7S5A (Socket A) pa.. Made the mistake of flashing it with a modified bios.

I researched about the board and found out that you can download the firmware and set it up in the floppy drive. When I turned on the system, it automatically flashed the bios from the floppy.

Try researching your board on how to do something similar.

tnx! bro.. pero sa imo pg flash before ni succeed ka? or hows ur mobo is it back to normal?

[sanlinux]

tnx! bro.. pero sa imo pg flash before ni succeed ka? or hows ur mobo is it back to normal?

Mura ug dli mn guru ka mka flash if wla display. Unsaon mn nmo pagka hibawo nga ni work to xa dba?


Ask lang ko bro, na test nba nimo imo Processor sa lain nga board? If na test na nimo unya y prblema aw sa board jud ang may problema ana.

Pero kung wla pa nmo ma test ang imo processor e-try daw ug butang ang heatsink compound / thermal grease sa imo processor ky bacn na overheat na. Mostly ingon ana sab ako na encounter nga wa jud siya dsplay pero ng.ON.