52c idle and 65c load normal ra for 7750?

[limes]

---

init man lagi na uy

kani na ako same ta procie using stock tanan

bai ubosa sad sa imong temp sa processor oi. nag aircon ka or whatever? 23c ra lagi na. try daw core temp kung unsa labas sa imo bai.

[and1rew]

idle na bro pag load na during games abot 34c xD, init dire sa amo-a wa ko aircon e-fan ra hehe, akon prob ra akong HD kay init ngita pa q hd cooler

airflow lang na using duke casing hehe grabe lang hakot sa dust xD, 3 120mm fans kusog huyop hehe, cable management pa

[istorya_19]

here are my temps for my 7750BE

[IMG]file:///C:/DOCUME%7E1/JCA/LOCALS%7E1/Temp/moz-screenshot-8.jpg[/IMG]

[limes]

here are my temps for my 7750BE

[IMG]file:///C:/DOCUME%7E1/JCA/LOCALS%7E1/Temp/moz-screenshot-8.jpg[/IMG]

bro ni DL ko anang CPUID ang temperature sa akong core kay 31c idle karon. nya core #0 ni nga temp wa lagi sa core #1? (trial) ray nakasulat wa man sad ko nag register or unsa. murag kulang kailangan pa ni nko i set or unsa? ako gamit na board kay ASUS m2n68-am se2.

[and1rew]

bro limes ang HWmonitor ang idownload ^^

[limes]

bro limes ang HWmonitor ang idownload ^^

bro mao man sad ako gamit CPUID which is HWmonitor pero pro lang 1.05 man ni nga version. kana ako gi try na sakto sad salamat bro. my current tempereture now is 30c for both cores

kaning tmpin0 ug tmpin1 sa hwmonitor, mao iyang gisunod na temperature sa asusprobe which is 47c and 41 respectively iyang labas kay sa cpu 47c while motherboard 41c. is this some kind of error? or mao ni katong mga sensors na way gamit? nag libog ko. wa jud ko nasweto sa ako board. nag lisud ko pangita reviews ani na board.

[chad8728]

Ei bros... I just installed my newly purchased HSF Gigabyte gh-pdu22-sc. When i checked my temps using coretemp and speedfan the temp of my procie was still the same. Idle at 39C and 50C+ when it loaded. I checked my BIOS using stock fan(old) which at 47C temp and when i installed my new HSF now it turned to 39C. Obviously, the temp from bios is different from any softwares that monitor the temp using my old stock fan. But how come my temps didnt go down when i installed my new HSF using coretemp and speedfan(still at 39C)? Any ideas bros.?

[limes]

Ei bros... I just installed my newly purchased HSF Gigabyte gh-pdu22-sc. When i checked my temps using coretemp and speedfan the temp of my procie was still the same. Idle at 39C and 50C+ when it loaded. I checked my BIOS using stock fan(old) which at 47C temp and when i installed my new HSF now it turned to 39C. Obviously, the temp from bios is different from any softwares that monitor the temp using my old stock fan. But how come my temps didnt go down when i installed my new HSF using coretemp and speedfan(still at 39C)? Any ideas bros.?

check daw sa reviews ana bai kung naa man gani about sa imong board kay basin naay mga errors ang pag ka assign sa mga sensors etc. murag bios update na ang uban.

[jiro]

Ei bros... I just installed my newly purchased HSF Gigabyte gh-pdu22-sc. When i checked my temps using coretemp and speedfan the temp of my procie was still the same. Idle at 39C and 50C+ when it loaded. I checked my BIOS using stock fan(old) which at 47C temp and when i installed my new HSF now it turned to 39C. Obviously, the temp from bios is different from any softwares that monitor the temp using my old stock fan. But how come my temps didnt go down when i installed my new HSF using coretemp and speedfan(still at 39C)? Any ideas bros.?

i dont get it. you installed new hsf now it becomes 39c. which is a good thing right? 47c to 39c?
so i dont get it. what are you complaining about?
also, you wont be able to reduce the idle temp that much, 39c is already ok.
i think its because of the way air cooling works, it'll reduce the temp at high load but not the idle temp by that much.
i think read that somewhere.


back to topic - it's hot hot hot! idle at 50c? you must be keeping the cpu at high load without adequate cooling sa casing. games perhaps? if hot air stays inside your case, it will warm your computer like an oven.
anyway, unsa imo procie? try kunu open casing lang and check temperature.

as far as i know, any software is only using the information found from the bios. it doesn't have it's own sensors, so it's only using bios info.

[chad8728]

i dont get it. you installed new hsf now it becomes 39c. which is a good thing right? 47c to 39c?
so i dont get it. what are you complaining about?
also, you wont be able to reduce the idle temp that much, 39c is already ok.
i think its because of the way air cooling works, it'll reduce the temp at high load but not the idle temp by that much.
i think read that somewhere.


back to topic - it's hot hot hot! idle at 50c? you must be keeping the cpu at high load without adequate cooling sa casing. games perhaps? if hot air stays inside your case, it will warm your computer like an oven.
anyway, unsa imo procie? try kunu open casing lang and check temperature.

as far as i know, any software is only using the information found from the bios. it doesn't have it's own sensors, so it's only using bios info.

What i mean is when i checked my temp using stock HSF with Core temp and Speedfan my temp is 39-40C idle while in my bios was 47c(i think nalibat lng cguro ko). But when i installed my newly acquired hsf, now my temp from softwares was still the same and from the BIOS it goes down to 37C. Nalibat ra cguro ko.. murag 49c cguro katong pag old hsf pa.