Taking A Shot At Water Cooling

[glide 1]

---

OT: Mangutana lang ko sir, unsa na imo gwrap sa imong front panel wires? The white one? Where did you buy it? Nangita jud ko ma wrap ani ako front panel wires...


Very nice setup bro, can't wait for it to be finished basin sundugon sad nako...ahahahaha!

Not sure what it's called bro, pero bought this at an electronics store - Teknica ang name sa store. Will try get you a # ug location nila. They use to be in colon but moved.

[glide 1]

hehe i meant case ra ako computer ron, and going to buy some case accessories sa states, like the Side Panel.

i see. pics nya when you get it.

[babolgam]

Not sure what it's called bro, pero bought this at an electronics store - Teknica ang name sa store. Will try get you a # ug location nila. They use to be in colon but moved.

Oh ok sir, mao nasad na ako gpangita karon nya ng lisud ko, hehehe. Thanks sir.

[andz]

i see. pics nya when you get it.

This:


ahaha

[omniknight]

Update: Test fitted everything except the watercooling components. I also powered the system using the xigmatek cpu cooler temporarily. So far so good....

side view






drive bay rear




front drivebay




Will be test fitting the pump, reservoir, etc today.

limpyoha pag ka trabaho oh.. you're a pro dude!..

[omniknight]

Here's some shots of a friends compression fittings and radiator, 1/2" internal diameter as opposed to mine which is 3/8" ID. Supposedly, only 0.5 - 1deg difference using the slightly bigger 1/2" fittings and tubing.






There is also a 45deg angled compression fitting pictured, quite handy if you need to route the tubing different directions. If i'm not mistaken, mo swivel pa ni sya, which is nice.

Also in the pic is the 1/2" ID, 3/4" OD (outer diameter) Black Tygon tubing. These things are nice and thick and less prone to kinking.

He will have his nicely spec'ed i7 system up soon, full CPU GPU watercooled using 2 independent loops for each. Can't wait...

cge go.. i ta-ud na.. hehehe

[i-7]

Glide 1, take your time, let it run para mas ma enjoy nato ug dugay. You have done an incredible job!

If availability of parts and price is not an issue, tintal na gyud ko ug butang ug tubig ani sa ako pc.

My minor suggestion would be, 1. Hide the 24 pin cable at the back, 2. Paint the inside of your case. Everything else is perfect, especially how the radiator fits at the front.

[glide 1]

Glide 1, take your time, let it run para mas ma enjoy nato ug dugay. You have done an incredible job!

If availability of parts and price is not an issue, tintal na gyud ko ug butang ug tubig ani sa ako pc.

My minor suggestion would be, 1. Hide the 24 pin cable at the back, 2. Paint the inside of your case. Everything else is perfect, especially how the radiator fits at the front.

Thanks for the kind words and suggestions. I'm seriously thinking of cutting out the holes for the 24pin, we'll see. What kind of paint do you recommend me using? I've tried Plylox type spray can paint before but results were mediocre and paint is prone to scratches. Can anyone suggest a good quality paint for this?

omniknight - thanks.

[glide 1]

Oh ok sir, mao nasad na ako gpangita karon nya ng lisud ko, hehehe. Thanks sir.

here's the # of the owner himself, his name is Matt. 09175498832

[poldopunk]

^ go for powder coating (pareha anang sa car paint ba) para ayus kaayo ug paint job sa sulod.