Overclocking 1.8Ghz t0 3.Ghz

[mE_bytes]

---

i lapped the CPU for better thermal conductivity.. n_n,
so okie rna.. hehe! cheapo procie ra pud bitaw.. hehe!

[mejie]

wow.... nice one u all got dir..... try lang nako adjust sa voltage cguro...... my ram is 2ghz kingston 800fsb..... by da way unsay cooling gamit nin u guys?......

[isyot_daut]

bro yaw lng kaau padala sa voltage jud...advice lng...good luck nlng jud,,,

[mejie]

ahh cge bro.. asa man jdu d i na mo matter? kay adto man ko cge adjust sa voltage. naabot gani ko ug 1.36volts...... per mo crash japon.... ram ba sad na? bati ba sad akong ram? kinahanglan ba e 4ghz nako? hehe daghan questions.... dli pa ko kontento sa 2.8 Ghz gud.. maka tontong lang ug 3, ayos na kaau.......

[eirawn]

Sulayan nako sa 333x9 dli man madala sa Vcore nga 1.335

Mas na stable sya sa 3.0 Ghz wid 1.35V

[mE_bytes]

your overclock defends on your motherboard pud, and your luck.. n_n,
btw, i'm using Silverstone 750W PSU, stable voltages and current..

[rockrhyan1982]

its doesnt matter sa MOBO as long as reliable ang PSU ug HSF..grabeha ana oi, 1.8Ghz to 3Ghz..hehehe goodluck tanan

[mE_bytes]

its doesnt matter sa MOBO as long as reliable ang PSU ug HSF..grabeha ana oi, 1.8Ghz to 3Ghz..hehehe goodluck tanan

I beg to disagree bai, there are motherboards that can't handle much overclocking. tried the cheapo ASROCK Wolfdale1333-D667 Mobo, and it can't OC'ed my E2160 @ 3.0GHz, Stock voltage; While the DFI Lanparty UT ICFX3200-T2R/G can OC'ed it @ 3.0GHz, Stock voltage. n_n,

[dmelsie]

@me bytes yeah thats right,
@mejie invest sa unsa og maau nga psu b4 ka upsy to 3ghz
useless imo core contact freezer if imo psu is generic
and btw usually if mo bigay ang generic naa ma among man gud

[lokster]

OC your processor is limited to the mobo, how much voltage it can handle, not the PSU, lol

OC'ing your processor to dangerously high levels will shorten its lifespan, i dont suggest you mess with the voltage and oc using stock voltages.