gskill 12800cl 8gig ddr3 1600mhz need tabang

[UrbaNo]

---

guys, mao ni ako problema. naa koy gskill ddr3 1600mhz 8gig.. if mag taod sad kos akong hyperfury 4gig ddr3 1600mhz. mo boot sya and normal ra tanan. if mag tang2x nakos hyperfury 4 gig. ang resulta sa gskill ddr3, no boot no display so dili ko ka setting nya sa bios. unsa kahay ma diagnose ninyo ani.
google pa ako gi researchan. sa karon wala pa gyuy kasulbaran.

pa tabang ko ninyo dre guys. daghan salamat!

things done
-ddr timings 9-9-9-24
-reset cmos jumper 10mins and tried 5 seconds
-reset defaults bios with the hyperfury

[keropi]

Boot with both, record all ram settings. Boot again then force those settings manually. Boot again with the 8gb without allowing the board to automatically reset bios.

Not foolproof but might work.

[UrbaNo]

got it boss! solved. ram settings to 1333mhz for amd, 1600mhz for intel. 10-10-10-30 dram timings. thanks. manually gyud day.

[keropi]

10-10-10-30 is waaayyy too loose. it pains me to see those timings. lol!

try 7-7-7-20/7-8-7-21 for 1333 and 8-8-8-24/8-9-8-24 for 1600. 9-9-9-27 at the very least for both at 1600

[Jess_V]

ma.o ni problema sa ddr4....bati ug timing
just saying.....

[butitoy]

ma.o ni problema sa ddr4....bati ug timing
just saying.....

DDR3 pa ni boss

[Jess_V]

DDR3 pa ni boss

I understand.....pasabot nako ang DDR4 pwerte ka loose ang timing.
Gi komparar lang naku both Urbano's and DDR4's timing which is relatively loose with respect to speed.

should have made my statement alot clearer

[butitoy]

it's okay.

[UrbaNo]

ei, il try to check those timing.. hope it works. thanks!