Pentium Unlocked! Anniversary Edition

[Tech Guru]

---

^^^ am using Gigabyte G1. Sniper Z97 mobo...kadtong akong gi-baligya sa B&S...will be shipped to the buyer today(taga Bohol)...

yes u need a BIOS update even w/ most Z87 & Z97 chipset mobos.....

bro, you mean nag BIOS update pa ka sa imung G1 Sniper para mu detect sya sa Pentium? Maayu unta kung attainable pod nang stable 1ghz overclock at stock vcore sa mga H-series boards.

[simoko]

^^^ yes nag BIOS update pa ko sa akong Z87-D3HP & G1. Sniper Z97...ma identify man dayon niya nga G3258 but dili lang nimo ma unlock ang multiplier kai non-K man iyang cpuid. mao nai reason nga u need an updated BIOS para maka oc ka...

refer lang sa website sa manufacturer sa inyong mobo kung naa bai BIOS update for overclocking the G3258...

kanang 1GHz @ stock voltage depende gyud na sa imong procie...mao nai gitawag ug luck of the draw...initial indicator imong tanawon is pilay vcore nya @ stock speed ug temperature...kung ubos gani kaau, dako kaau chance nga taas iyang maabot sa oc...kaning akong ES chip kai 1.068v @ 3.2GHz, 32c...

then mo matter pod na imong mobo...basta word of caution lang...DON'T TOUCH THAT CPU PLL VOLTAGE SETTING unless u know what u are doing...gamaing sipyat nimo ana, sunog na imong procie...

[Tech Guru]

^^

kanang 1GHz @ stock voltage depende gyud na sa imong procie...mao nai gitawag ug luck of the draw...initial indicator imong tanawon is pilay vcore nya @ stock speed ug temperature...kung ubos gani kaau, dako kaau chance nga taas iyang maabot sa oc...kaning akong ES chip kai 1.068v @ 3.2GHz, 32c...

...

Engineering Sample? asa ka naka kuha ana bro simoko? bro, ang imung gi post sa CPUZ screenshot nimo nga 4.2Ghz was running at 1.293 vcore, and your stock vcore kay 1.068?

[simoko]

Engineering Sample? asa ka naka kuha ana bro simoko? bro, ang imung gi post sa CPUZ screenshot nimo nga 4.2Ghz was running at 1.293 vcore, and your stock vcore kay 1.068?

pls. refer to my 2nd post(after adtong nay Validated CPUz)...I specifically said nga stock voltage pa na, wala pa koi gi tweak ana...in short naka AUTO ang settings sa Vcore value sa mobo...sorry for not being very clear about it...kanang 1.068v @ 3.2GHz naka Auto gihapon ang Vcore...

[Tech Guru]

pls. refer to my 2nd post(after adtong nay Validated CPUz)...I specifically said nga stock voltage pa na, wala pa koi gi tweak ana...in short naka AUTO ang settings sa Vcore value sa mobo...sorry for not being very clear about it...kanang 1.068v @ 3.2GHz naka Auto gihapon ang Vcore...

Oh I see bro. actually an Auto Vcore bro over-volts or overclocks the voltages of the processor automatically depending on the frequency of your OC speed. So the 4.2ghz achieved was not under stock vcore, but on auto vcore which is overvoltaging too. But good gihapon bro, imagine 4.2ghz stable at a low 1.293v, you've really got a good chip there.