Question: Is it safe to add a couple of LEDs in Motorcycle Mio-Scooter?

[engg123]

kani o simple circuit kaayo just to protect your LED device




pwde na i omit ang resistor kung plug and play na imo LED sa 12VDC

pwede ra man unta 1N4001 1A 100V pero basin loadan nimo more than 1A mao 1N5401 ang gamiton para gaan ra dal-on imo mga additional LED

ang LED strip isa ka roll ang rating ana is 2A/5meter so kung 1meter strip ang load is just only .4A or 400mA, or kung per cut which is 10 cut per meter current lang ana is .04A or 40mA...

sa taga led bro butangan ani? or ie common lang cla? pwd ra usa ka circuit sa headlight,signal,park og tailight?

[blacklion]

Naa ra imong girequest boss, both original wiring diagram and the modified one, as you can see on the modified one na koy gi reroute nga wire kay para inig OFF nimo sa main switch mu OFF sad ang headlight ug tail light incase you forget to turn OFF the Headlight Switch, then as you notice puro na DC lines imong Head/Tail wiring, diretso ra ka ta-ud sa mga LED bling2x nimo hehehe




























Just to give you a heads up, ang LED headlight (HI/LO) will only consume a maximum of 1.5 amps @ 12VDC and 0.75 amp @ Low Beam, meaning di na ka kinahanglan mag ilis ug wiring or mag modifiy pa, you can use the existing stock wiring harness kay ang imong load mas gamay pa sa original stock bulb (35w/35w)

so ilisdan ang regulator? o pun.an?

[KH0UJ]

so ilisdan ang regulator? o pun.an?

ilisan.........

[azland]

guys patabang sadko,. ako MC kai XRM 110 all lights converted to LED since 2010,. Im using a LED headlight pero busted na ang LED controller, para magamit pa, ako gi direct sa battery pero low beam ra ang magamit nako.. i need to use the high beam since mag travel ko by night and dawn. dili na sad stock ang ako battery, i am using an after market battery kai need it para maka andar ang mga LEDs for the purpose ug travelling. pwede mo kahatag ug solution para maka gamit ko hi/low beam using my LED headlight. sayang man gud if ilisan nako lain.

[azland]

up nato.. need help for a LED driver...