Advance Troubleshooting: Boot Fail + Status: 0xc00000e9

[shryock]

---

Hi all.

System:
Asus K43SJ-VX384
Windows 7 Ultimate (Jack Sparrow)
4GB RAM (2gb native)
Sata mode: AHCI
Original Boot Sequence: HDD first then ODD
Altered Boot Sequence for Repair: ODD first then HDD

Issue: Boot fail, won't start normally, startup repair does not help

Before the issue:
The laptop was at sleep. Last program running was lightroom and chrome.
Programs were closed before sleep. Went out for a while.

Returned home, turned the laptop back on.
Did not notice that the battery was almost empty.
Laptop suddenly turned off due to empty battery.
Turned it back on after inserting the power brick to wall socket.
Boot fails to complete.

Solutions tried:
1. How to Fix Windows 7 When It Fails to Boot

tried it but the DVD won't run completely. thats when i got the status 0xc00000e9 when i boot from the DVD.

2. chkdsk returns no errors, HD is probably ok
3. command prompt, F: dir , then running setup.exe returns this error:
"The subsystem needed to support the image type is not present."

Hardware Isolation:
1. Hard Drive is OK: chkdisk reports no error and recognized in DOS
2. Optical Drive is OK: DVD readable from command prompt, recognized in DOS also
3. SATA controller, I dont know how to check for issues
4. DVD installer, probably ok since its readable. but cannot run setup.exe from CMD. this is an All-in-One Windows installer by the way.

I cannot continue my repair anymore.
I'm stucked between a DVD not loading and the system wont run the setup.exe.

mga master, please help.

[shryock]

I want to try something. Can someone help me how to run the 64bit command prompt from the startup repair?? startup repair CMD prompt default is 32bit.

[butitoy]

Black Screen with error 0xc00000e9 after reboot


This is, in fact, a registry error. Typically, using a Windows repair disk may help.

"Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:

1. Insert your Windows installation disc and restart your computer.

2. Choose your language settings, and click "Next."

3. Click "Repair your computer."

[shryock]

Black Screen with error 0xc00000e9 after reboot


This is, in fact, a registry error. Typically, using a Windows repair disk may help.

"Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:

1. Insert your Windows installation disc and restart your computer.

2. Choose your language settings, and click "Next."

3. Click "Repair your computer."

yeah. thats what im aiming. pero ang ako DVD kay dili single OS ra. AIO siya. naay multiple versions sa win7.
so boot from disk results to status 0xc00000e9.

dili sad ko kapadagan setup.exe sa 32bit command prompt.
mag cge prompt na "The subsystem needed to support the image type is not present"
i think it needs 64bit CMD (SysWOW64) to run 64bit also.

[butitoy]

it will work as good bro

my jack sparrow win7 is a 48n1

but i had tried using it to repair an error of same type

[shryock]

it will work as good bro

my jack sparrow win7 is a 48n1

but i had tried using it to repair an error of same type

something wrong sa DVD tali kay di jud sya mulahos sa setup.exe..

pwede ba kaha ni gamitan 32 bit win 7 ultimate? para mag fix sa 64bit win7 ultimate?

[butitoy]

dili bro

u need 64bit to fix 64bit OS

[shryock]

dili bro

u need 64bit to fix 64bit OS

pero any version will do master sa? like home na 64bit gamiton para fix sa ultimate na 64bit?

[butitoy]

i think pwede ra bro

kay registry ra man na and its among the basic | fundamental ones

the feature set of the ultimate is on the GUI and security functions

Windows 7 editions - Wikipedia, the free encyclopedia

[shryock]

i think pwede ra bro

kay registry ra man na and its among the basic | fundamental ones

the feature set of the ultimate is on the GUI and security functions

Windows 7 editions - Wikipedia, the free encyclopedia

cge cge. ill try and look for other installers later. I really don't want to fresh install. hehe