2 diff modem routers in 1 switch! Is it possible? Pls help!

[laven]

---

nice comments want to learn more simple network

[jaysolivanparagat]

so pasabot bro usbon nko ang ip address sa 2 ka modem+router na e provide sa globe bsta lng dli same address sa dual wan router na ako paliton.. e clear lng nko bro both modem+router knhanglan dli mg pareha ang ip address, ig taud nko sa dual wan router? thnx sa idea bro, mg palit na lng jd ko anig dual wan router...

- - - Updated - - -

Two modems --> Dual wan load balance router --> Network switch --> Computers


The dual wan load balancing router will even (From the word, balancing) the distribution of the internet speed in your entire network thus should help the congestion.

bro na-a ka idea pila ang dual wan router ron?

[Manok]

so pasabot bro usbon nko ang ip address sa 2 ka modem+router na e provide sa globe bsta lng dli same address sa dual wan router na ako paliton.. e clear lng nko bro both modem+router knhanglan dli mg pareha ang ip address, ig taud nko sa dual wan router? thnx sa idea bro, mg palit na lng jd ko anig dual wan router...

- - - Updated - - -




bro na-a ka idea pila ang dual wan router ron?

No idea na bai how much nowadays. Try canvassing online (search using google) or visit local stores.

[silentnuker]

naay functi0n kanang mga modem router t0 act as either bridging mode or routing mode.

my advice for you is t0 use the bridging m0de only...meaning you don't use its routing functi0n.

this way you don't have difficulty. router t0 router links would result t0 m0re complex
rules, port-forwarding, ip address assignment (whether dhcp or static). so unless you are
completely aware of what you are doing, then better simplify the w0rk by n0t using the functi0n
which is n0t needed.

and yes...buying a dual-wan router with l0ad balancer is your best opti0n.

connect the 2 m0dems t0 the dual-wan router and your good t0 go.

kat0ng im0ha unta plan t0 connect the 2 m0dems sa usa ka switch would still work...sakt0 ang
ing0n sa uban nga if enable and DHCP sa duha...kung kinsa ra ang mka-una reply sa request
siya ra ang mka-hatag ug ip...even if its static usa ra gihap0n ang ang magamit nga gateway
per Netw0rk interface card...nind0t kung duha ka bu0k ang im0ha NIC it can effectively use both
the 2 gateways at the same time...but I kn0w im0ha target is t0 effectively utilize the bandwidth
of b0th your 2 ISPs.

try sa canvass2 sa mga c0mputer st0res...i think you can buy a dual-wan router w/n the
3k to 8k range f0r the cheapest one...hardware based l0ad-balancers are generally expensive
hardwares.


and one thing, dili bawal nga ma-say0p ug setup...all netw0rk admins started fr0m scratch.

[laven]

nice like it thumbs up guuys

[jaysolivanparagat]

naay functi0n kanang mga modem router t0 act as either bridging mode or routing mode.

my advice for you is t0 use the bridging m0de only...meaning you don't use its routing functi0n.

this way you don't have difficulty. router t0 router links would result t0 m0re complex
rules, port-forwarding, ip address assignment (whether dhcp or static). so unless you are
completely aware of what you are doing, then better simplify the w0rk by n0t using the functi0n
which is n0t needed.

and yes...buying a dual-wan router with l0ad balancer is your best opti0n.

connect the 2 m0dems t0 the dual-wan router and your good t0 go.

kat0ng im0ha unta plan t0 connect the 2 m0dems sa usa ka switch would still work...sakt0 ang
ing0n sa uban nga if enable and DHCP sa duha...kung kinsa ra ang mka-una reply sa request
siya ra ang mka-hatag ug ip...even if its static usa ra gihap0n ang ang magamit nga gateway
per Netw0rk interface card...nind0t kung duha ka bu0k ang im0ha NIC it can effectively use both
the 2 gateways at the same time...but I kn0w im0ha target is t0 effectively utilize the bandwidth
of b0th your 2 ISPs.

try sa canvass2 sa mga c0mputer st0res...i think you can buy a dual-wan router w/n the
3k to 8k range f0r the cheapest one...hardware based l0ad-balancers are generally expensive
hardwares.


and one thing, dili bawal nga ma-say0p ug setup...all netw0rk admins started fr0m scratch.

btaw nka dungog nko anang bridging mode bro, once ma bridge nko ang both modem+router, pde ra dli nko mopalit ug dual wan router bro? kay mdyu pangitaun pman ang dual wan ron nowadys den if na-a medyu bug-at pa sa budget ky pricey kaau, if possible bro na mabridge nko ang modem+router bro matagaan ko nmu basic diagram for setup bro.. from 2 modem+router(bridge mode/same isp provider) to Switch. thkns sa idea bro!!

[oneshot23]

sakto sila sir pwede na ibutang nimo ang 2 ka modem/router sa switch basta same lang ang IP ex. sa globe kay 192.168.254.254 dapat ang pldt nimo 192.168.254.x sad. Magkita rana sila sa network pero kung internet if unsa naka butang ngadto sa default gateway mao rasad to iya gamiton.

[kitloy]

Daghan cdr king dual wan router .. Range 1800-2500 lang siguro

[skyjunie]

yes, kinahanglan ka og dual wan router
naako ko diri DI-LB604 wa nako gigamit kay nagupgrade kog 4 wan router

[Rainerius]

You need a dual WAN router, failover raman ni just in case down ang isa you still have the other one or you set individual PCs to connect to either of your WAN internet connections. Dili na pede imohang e-combine ang 2 connections para mo kusog imong internet.