SmartBro and Windows 7 compatibility

[ramini0626]

---

pag dli njud ma da bai, pag windowsXP nlang hehe, or try lain installer sa windows 7..

[Aprodite]

Hey bro,

Just follow these simple steps.

1. First, unplug the SMARTBRO device and uninstall completely in the Windows Program Manager (located in the Control Panel) the previously installed SMARTBRO program. (If you have installed it earlier and it failed to detect signal or having other problems).

2. Plug-in the SMARTBRO Modem Device. Wait for the AUTOPLAY DIALOGUE BOX to appear.

3. Do not click AUTORUN, rather click OPEN FOLDER TO VIEW FILES.

4. Once the window appears, go inside the INSTALLER FOLDER by double clicking it.

5. Right-click SETUP and click TROUBLESHOOT COMPATIBILITY just below Run as Adminsitrator.

6. Allow it to detect issues, it would take about 10-30 seconds. If it takes longer, be patient.

7. Click TRY RECOMMENDED SETTINGS, then it will proceed to RESOLVING ISSUES activity and finally it will recommend a setting that best suits the program.

8. Click START THE PROGRAM. Follow-on the installer's regular commands to complete the install.

9. After installing, you may now test the SMARTBRO plug-in device software to connect to the internet. There should be no more problems detecting the signal and the sim.

10. Click NEXT in the COMPATIBILITY DIALOGUE BOX and click YES, SAVE THESE SETTINGS FOR THIS PROGRAM and you are done...

pm me if it doesn't work at all...

atot oie, ing.ani sad akong probs..di jud xa mowork japun.. gitry na nko ni tanan..

[johnwall]

akoy aayo ana mam beh^^

[globetattoo]

basin sa OS ni nimo ts.

[Ahvenboi]

check usb modem or usb port basin naay problema....

[boyguapo]

basin kulang lang ka sa drivers sa imong OS TS, if dili madala, kong taga cebu na, diri kuno paayo nako kay akoy pa work ana.

[Aprodite]

akoy aayo ana mam beh^^

nah, I think ang OS nko ang daut.. nka on man gud ang windows update ato nya karon kay naay display sa akong screen nga "windows is not genuine"..nya gitry man nko ang smartbro sa lain pc with mac, xp ug win7 pud mowork man xa... OS jud tingali prob ato.. Faets!

[ningkamot]

Hey bro,

Just follow these simple steps.

1. First, unplug the SMARTBRO device and uninstall completely in the Windows Program Manager (located in the Control Panel) the previously installed SMARTBRO program. (If you have installed it earlier and it failed to detect signal or having other problems).

2. Plug-in the SMARTBRO Modem Device. Wait for the AUTOPLAY DIALOGUE BOX to appear.

3. Do not click AUTORUN, rather click OPEN FOLDER TO VIEW FILES.

4. Once the window appears, go inside the INSTALLER FOLDER by double clicking it.

5. Right-click SETUP and click TROUBLESHOOT COMPATIBILITY just below Run as Adminsitrator.

6. Allow it to detect issues, it would take about 10-30 seconds. If it takes longer, be patient.

7. Click TRY RECOMMENDED SETTINGS, then it will proceed to RESOLVING ISSUES activity and finally it will recommend a setting that best suits the program.

8. Click START THE PROGRAM. Follow-on the installer's regular commands to complete the install.

9. After installing, you may now test the SMARTBRO plug-in device software to connect to the internet. There should be no more problems detecting the signal and the sim.

10. Click NEXT in the COMPATIBILITY DIALOGUE BOX and click YES, SAVE THESE SETTINGS FOR THIS PROGRAM and you are done...

pm me if it doesn't work at all...

Boss, it will not work out using windows 8 with my smartbro stick.. Do you have any other advice boss?

[mr_penz]

Try my step boss. Mao ni ako ginabuhat.

Run it in compatibility mode and admn mode.


1. Uninstall (using Windows Program Manager)
2. Plug the smart bro pero ayaw i install.
3. Right click sa exe file
4. goto properties and check "run this program in compatibility mode"
5 . Select windows xp 32 or 64
6 . Check sad anf run as admin

[trying]

i think dili man sa OS ang deperensya TS. Same OS ba gamit nimo when you try your globe? Kay kung same OS so dili OS imo probs...

nah, I think ang OS nko ang daut.. nka on man gud ang windows update ato nya karon kay naay display sa akong screen nga "windows is not genuine"..nya gitry man nko ang smartbro sa lain pc with mac, xp ug win7 pud mowork man xa... OS jud tingali prob ato.. Faets!