Gigabyte GA-F2A75M-HD2

[karren_arthur]

---

Have you encountered this problem?

HI,
nag upgrade ko ug ram to 4x4gb 1866mhz Red Ripjaw Gskill.
ang Ram1 and Ram2 ra ako g gamit mao ni karon..
mo error or mo blue screen man cya. ive tried changing the frequency sa bios and voltage.
1866mhz then 1.5v na xa.

ngano mo mo blue screen ghapon xa kadugayan?
and while playing nba2k13 or HON mo crash xa. dili crash with error but ma wala lang jud xa. if naa mo ma advise. please do post your comments below. thanks.

really appreciate who come and do typing efforts to this problem. hehee. peace y'all!

- - - Updated - - -

A8 trinity FM2 socket BTW!

[werty]

-try daw testing each one if walay errors.
-try increase voltage.
-quad-kit ni? or separate ug palit?

[Tech Guru]

Gi overclock nimo imung RAM TS? At stock speed mag BSOD gihapun sya?

TS try to run memtest or other RAM stability tests para mahibaw-an nimo f defective imung rams, so if naa pa nay replacement or warrantee, then mabalik pa na nimo

[karren_arthur]

@werty quad kit ni cya. but im using the 2. increase the voltage? dili raba ma daog? na try nako ang usa usa. mu blue screen xa. or while playing ma wala lang kalit ako g duwa.
@Tech Guru overclock? murag wala man boss. wala man ko g usab. aqng frequency ky 1866 dapat. 1600mhz ra makita sa bios, ako nasad xa usbon. unsaon pag memory test? .bat file?

[lloyd_joy]

@ TS,

try to manually lower down the timings... then change the CR to 2... if naka 1 sya by default...

by the way, unsa CL sa kit?

[karren_arthur]

@ TS,

try to manually lower down the timings... then change the CR to 2... if naka 1 sya by default...

by the way, unsa CL sa kit?

boss, wala raba ko idea sa timings, CR, or CL. ako nya tan.awon ako rams sa balay. napa ko office today gud.

sa bios ghapon makita ang timings? unsa nang CR? dili maka guba patas.an ug voltage?

[lloyd_joy]

^ ah i see... yup, sa bios na sya... CR is command rate... unsa man ang CPU nimo diay? @ stock speed ra man unsa na... ideally, "plug & play" ra man unta... anyway, try lang sa ug manual adjust sa timing nya... dili ra na maka saka sa voltage nimo... timing ra man... if naa man gani, pwerteng gamaya... insignifant... it is still w/in the 1.5V range...

all smiles man unta nang APU on faster mem modules... sige lang, huwat ta's comment pud sa uban... labi na katong naa'y 1st hand experience in dealing the issue...

[harhar]

Have you encountered this problem?

HI,
nag upgrade ko ug ram to 4x4gb 1866mhz Red Ripjaw Gskill.
ang Ram1 and Ram2 ra ako g gamit mao ni karon..
mo error or mo blue screen man cya. ive tried changing the frequency sa bios and voltage.
1866mhz then 1.5v na xa.

ngano mo mo blue screen ghapon xa kadugayan?
and while playing nba2k13 or HON mo crash xa. dili crash with error but ma wala lang jud xa. if naa mo ma advise. please do post your comments below. thanks.

really appreciate who come and do typing efforts to this problem. hehee. peace y'all!

- - - Updated - - -

A8 trinity FM2 socket BTW!

DDR3-1600 ni imung RAM?

[karren_arthur]

DDR3-1600 ni imung RAM?

1866mhz Red RipjawZ Gskill.

- - - Updated - - -

^ ah i see... yup, sa bios na sya... CR is command rate... unsa man ang CPU nimo diay? @ stock speed ra man unsa na... ideally, "plug & play" ra man unta... anyway, try lang sa ug manual adjust sa timing nya... dili ra na maka saka sa voltage nimo... timing ra man... if naa man gani, pwerteng gamaya... insignifant... it is still w/in the 1.5V range...

all smiles man unta nang APU on faster mem modules... sige lang, huwat ta's comment pud sa uban... labi na katong naa'y 1st hand experience in dealing the issue...

mao lage. abi nako plug and play pud xa. @_@ i bought this to a fellow istoryan ra pud..

[harhar]

1866mhz Red RipjawZ Gskill.

- - - Updated - - -



mao lage. abi nako plug and play pud xa. @_@ i bought this to a fellow istoryan ra pud..

Ayaw na hilabti imung voltage...

- - - Updated - - -

Mao ni imung memory RipjawsZ - F3-14900CL9Q-16GBZL - G.SKILL DDR3 Memory?