Watercooling Temps Question

[LordZhen]

---

Im wondering man gud, HOw fast will it reach equilibrium on its heating cycle.. if fast moving water fixes this issue, then ang next batch of water nah ang m.cool sa katong gbyaan sa first batch?

fast enough that it will show temps on your core temp or hw monitor. Yes correct, its like ako nag una nimu, ako gikuha ang init, nya mao ra ako makuha duha ka init kay duha ang ako kamot, ang gasunod nako si bro lloyd, mokuha pud siya duha ka init kay duha ra iya kamot, then ang sunod ikaw, mokuha pud ka duha ka init kay duha ra imu kamot, then mobalk ko and so on and so forth. Ing ana ang principle, mao paspas ang flow sa tubig sa loop. Kay dili makuha tanan sa water particles ang heat or ma dissipitate niya ang heat on a slow pace

[Mr_ALDZ]

correct. . .nice analogy. . .wahahaha! nya saman balik tah ug Chemistry ani kai murag abot naman jud tah ani ug mga water particles. . . . hehehehe!


Kung paspas ang flow. . . Ma.pressure man ang mga water molecules to flow together with the other 2ngud sa Cohesive ug Adhesive property sa H2O Molecules. So, slowly getting the heat on that component pro pas2 ang cycle. . .


at NORMAL FLOW-----> 1H2O gets 50%(example lang) heat from the first block. . . then go napud sya sa second block w/ 50% heat + Heat absorb sa Second block . . . .then so on and so forth. . . So, mao imu concern is init na ang water at the last block right?

at FAST FLOW------> 1H2O get 15%(example lang) heat from the first block. . . then go napud sya sa second block w/ 15% heat + Heat absorb sa Second block . . . .then so on and so forth. . . Meaning with this setup ma.answer imu question with regards sa imung LAST WATER BLOCK. . .

[POPiO]

kung mag closed loop man gani, ayaw jud tong nipis ug rad, mas maayo pag performance hyper 212 na tah 1.5k compared anah hehe.

boss tagpila ang hyper 212...? asa man nga store available?..

[Conrad]

I think ang common principle sa pc watercooling is

120mm radiator = 1 block, maybe cpu or gpu or etc.
240mm radiator = 2 blocks, maybe cpu ang gpu or cpu and ram or etc.
360mm radiator = 3 blocks, cpu, gpu and ram

If you need more blocks then need additional radiator, it all depends in your requirement. This is to achieve equilibrium on thermals
Bigger radiator, high cfm fans, better performance. If mo follow lang ta ani nga rule, dili init ang water sa last block.

[LordZhen]

Sakto si bro Conrad, and to add up, ang placement sa radiators sa case for the entry points sa tubig to the radiator