Page 1 of 18 123411 ... LastLast
Results 1 to 10 of 173
  1. #1

    Default HELP: My First Rig Build


    Palihug lang tag jump sa last page para sa mga current pangutana nako. Salamat sa mga mutambag, nitambag, ug tambag haha

    ----

    pwede ba ko mag 4 rams bisag single module ra ang memory configuration sa akong napalit nga ram.? dili kanang dual channel or quad channel buh.. tnx

    will be posting more issues about my build soon so check2 lang gihapon mo mga master

  2. #2
    C.I.A. werty's Avatar
    Join Date
    Feb 2003
    Gender
    Male
    Posts
    7,172
    Blog Entries
    1
    better merge this with your other thread---since its related. but to answer your question(bsan murag wa ko kasabot) much better if dual-kits or quad kits deretso imo gamiton to avoid any compatibility or timing issues. tested naman na sila that it works in pairs or quad setup.

  3. #3
    @werty : so pasabot, dili gyud ko pwede mag.4 rams sir.? N.palit nmn q gneha ug 2x4GB Corsair Vengeance gud.. dili siya dual channel.. single module ra.. (mao ang nakabutang under sa memory configuration sa tech specs didto sa corsair website)

    btw, CoolerMaster Thunder 450W akong napalit nga PSU.. Efficiency kay >85% @ Typical Load man gud..
    dili man kasabot mga tao sa Nutech if ingnun nako kung naa ba sila'y 80+ nga PSU..

    about sa thread, para mana mas daghan makakita ani sir.. misleading man gud to
    Last edited by xy.techNOS; 08-09-2013 at 07:30 PM. Reason: double post

  4. #4
    Quote Originally Posted by xy.techNOS View Post
    @werty : so pasabot, dili gyud ko pwede mag.4 rams sir.? N.palit nmn q gneha ug 2x4GB Corsair Vengeance gud.. dili siya dual channel.. single module ra.. (mao ang nakabutang under sa memory configuration sa tech specs didto sa corsair website)

    btw, CoolerMaster Thunder 450W akong napalit nga PSU.. Efficiency kay >85% @ Typical Load man gud..
    dili man kasabot mga tao sa Nutech if ingnun nako kung naa ba sila'y 80+ nga PSU..

    about sa thread, para mana mas daghan makakita ani sir.. misleading man gud to
    pareha ta ug PSU boss 620w lang nga version ako.a ... asa na nutech ka ni palit?

  5. #5
    Nakaporma na gyud ko sa basic build sa akong Rig.. So far mao pani akong naporma:

    CPU : Intel Core i5-3550
    CPUc: Antec KUHLER H2O 620 (Dili pa closed loop)
    MoBo: MSi B75A-G43 Gaming
    RAM : 2x4GB Corsair Vengeance 1600Mhz (Black)
    HDD : 1TB WD Caviar Green (32MB)
    ODD : DVD RW
    Case: CM Storm Scout II w/ 1x120mm CoolerMaster Red LED Fan
    PSU : CoolerMaster Thunder 450W

    Ganahan sad ko mag.install ug LED Lights sa akong Rig.. Kanang sa motor ra.. Nabasahan nako from a thread here @ istorya: https://www.istorya.net/forums/comput...ht-sticks.html
    Akong suwayan ug himu. Pero mas interested ko sa COLD CATHODE LIGHTS. If naay makatudlo nako unsaon na pg.install sa RiG, I will greatly appreciate it.!

    Tapos plano sad nako mu.add ug 2x120mm Red LED Fan. K2ng naa sa BnS section. Ako to hap, walay mupalit laen ato.! haha
    Niya sa vCard, Powercolor HD 7850 akong gitiguman.. 8,250 sa Nutech niya sa GI(Pricelist)+2.5% kay 8,000 ra. Mao ni siya specifically:
    PowerColor Official Website - Graphics, Cases, Power Supply -- PowerColor HD7850 2GB GDDR5

    Akong pangutana, kung dili bako magkuwang ug juice ani or if makaya pa sa akong PSU, ok raba na nga permi in 100% load mudagan akong PSU.? Maka-decrease na siyag life-span sa PSU or ok rana.? Tnx

  6. #6
    C.I.A. werty's Avatar
    Join Date
    Feb 2003
    Gender
    Male
    Posts
    7,172
    Blog Entries
    1
    I dont knw how separate 12v rails work but specs says that 7850 needs continous 24amps, while ang thunder has v1@21amps, v2@18amps. I guess bugat ra ang card for the psu. But w8 lang tas uban kai wa d pa lo sure about split rails.

    UPDATE:
    i don't really know how accurate manufacturer's mark their products and/or how accurate data is. but if its correct, kuwang ra imo thunder 450 for 7850. see links nalang below.

    Power requirements for graphics cards
    Thunder 450W - Cooler Master

    update2:
    i think kinda good to go pa imo psu diay. 12v total is 360watts = 30Amps.
    Last edited by werty; 09-01-2013 at 02:47 PM.

  7. #7
    To answer your first question, the word "module" refers to the physical RAM stick. Module means Stick. so one module is one stick. dili na sya identical sa word nga "Single Channel." vice versa, ang dual module refers to "Two physical RAM Sticks," and it does not refers to "Two channel or Dual channel." So if you have 2x4, then you have two modules with 4GB memory capacity each, I think it's also a dual channel. You can actually put as many RAMs you can as long as naa pay slots ang imung motherboard. the "Channel" only refers to the Bus roadway from RAM to CPU back and forth. the more channel you have, the more nicer ang flow sa data. example, if you put two modules on a dual channel capable motherboard (controlled by chipset), then dili sya optimal, kay mag ilugay sa single road (channel) ang duha ka module. instead of two modules running on two channels. I hope u get it

    - - - Updated - - -

    edit **

    if you put two modules on a *Single channel capable motherboard (controlled by chipset), then dili sya optimal, kay mag ilugay sa single road (channel) ang duha ka module. instead of two modules running on two channels. I hope u get it

  8. #8
    Elite Member POPiO's Avatar
    Join Date
    Apr 2013
    Gender
    Male
    Posts
    1,787
    Quote Originally Posted by Tech Guru View Post
    To answer your first question, the word "module" refers to the physical RAM stick. Module means Stick. so one module is one stick. dili na sya identical sa word nga "Single Channel." vice versa, ang dual module refers to "Two physical RAM Sticks," and it does not refers to "Two channel or Dual channel." So if you have 2x4, then you have two modules with 4GB memory capacity each, I think it's also a dual channel. You can actually put as many RAMs you can as long as naa pay slots ang imung motherboard. the "Channel" only refers to the Bus roadway from RAM to CPU back and forth. the more channel you have, the more nicer ang flow sa data. example, if you put two modules on a dual channel capable motherboard (controlled by chipset), then dili sya optimal, kay mag ilugay sa single road (channel) ang duha ka module. instead of two modules running on two channels. I hope u get it

    - - - Updated - - -

    edit **

    if you put two modules on a *Single channel capable motherboard (controlled by chipset), then dili sya optimal, kay mag ilugay sa single road (channel) ang duha ka module. instead of two modules running on two channels. I hope u get it
    I Think you explain it clearly..

  9. #9
    up up and away...

  10. #10
    OT: @mourneblade00 gapadaghan posts ai.. if ing.ani ang imong style pagpataas ug post, bantayanan nah kaau ka sa BNS anah.. mas maglisod nah hinoon ka ug sell anah nga style!

  11.    Advertisement

Page 1 of 18 123411 ... LastLast

Similar Threads

 
  1. guys. help build my gaming rig.. 15k budget
    By ton2xadik2x in forum Computer Hardware
    Replies: 34
    Last Post: 12-12-2012, 06:30 AM
  2. Need Help on my first build
    By jangjung in forum Computer Hardware
    Replies: 6
    Last Post: 05-15-2012, 08:02 PM
  3. Hey guys please help me. Its my first time here!
    By briansy in forum General Discussions
    Replies: 8
    Last Post: 10-02-2010, 09:08 PM
  4. help me decide on buying my first car etc..
    By bryC9 in forum Automotive
    Replies: 23
    Last Post: 07-31-2009, 10:38 PM
  5. Replies: 9
    Last Post: 07-13-2006, 01:55 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
about us
We are the first Cebu Online Media.

iSTORYA.NET is Cebu's Biggest, Southern Philippines' Most Active, and the Philippines' Strongest Online Community!
follow us
#top