LAN PROBELM ? HANGUP

[rkc_888]

---

mga bro.. naako internet cafe diri sa cebu naalang koy problema about sa connection sa net or lan games etc..

mao ni mga items nako are:

one unit - celeron 2.4 512 mb server for print, scan. system WINDOWS XP HOME with DEEP FREEZE

18 units PENTIUM 4  3.0GHZ  1GB RAM 80 HDD ASUS MB 256MB VGA, systems WINDOWS XP HOME with DEEP FREEZE
LAN games COUNTER STRIKE, DOTA etc..... online games mostly akong gamit.

16 port umanaged switch (ordinary)

uplink lang nako ang   8 port umanaged switch (ordinary)

ang problema nako ang printing usahay ( unable to print ) or dili makita ang printer sa network.  HP LASERjet 1000 and epson c45

ang lan cables ok raman wala problema. hapsay kaayo pag-cabling.

unsay problema ana ... tel me guys

thanks ...

mao ni ang akong mga IP ADDRESS manual configured ( STATIC ) each pc or workstation

192.168.1.101 to 118 warkstation 1 to 18

192.168.1.119 SERVER (print,scan,etc.)

[Zirv]

if you configured your printer for sharing

make sure its the default printer on all workstations.

if not the workstations will have a hard time looking for it.

give all your workstations a static ip also that will help speed up things

[Chipmunk888]

and also this....

if you know droptest, ping all your workstations, see if the latency is below 1ms. if you find bigger than below 1ms (time<1ms) or even "request timed out", then your network is no good.

[leo_trams]

ilisi ang switch hehehe.

puede pud cable problems. or NIC problems.
tingali pud ug naa ka application dinha nga nag-hog sa bandwidth sa imo network. murag DOS attack ba.
test latency for all workstations.

[rkc_888]

ilisi ang switch hehehe.

puede pud cable problems. or NIC problems.
tingali pud ug naa ka application dinha nga nag-hog sa bandwidth sa imo network. murag DOS attack ba.
test latency for all workstations.

maoba ang switch mismo ang problema? i see... btw unsaon ang pagtest sa latency? unsay command? asa man ko mo test sa server? or sworkstation .. tag-sa tag-sa

[leo_trams]

latency? simple ping ra gud, betwen stations/server....

tan-awa ang time...

ping nako ako router, time=10ms. my router is approx. 4km away.
that should give you an idea.

[dexfranco]

if you've configured your network correctly, i have one trick i learned that can cause network printing bog down. If your printer has a printer monitoring agent turn it off, ex. epson print monitor most print monitoring software can cause delays in printing since wala may feedback ang printer kung shared through the network so sigi ug wait ang print monitoring agent, most of the print monitoring software have an option to disable it. Just disable the client computer's monitoring agent not the computer attached directly to the printer. Remember just be sure you can access the printer first. Pero if mo print siya if you wait long enough, murag mao ni ang problem. Hope this helps !!! :mrgreen:

[niel_X]

wla man problem ang imo ip's but naa rana sa switch or cable.. yah try pinging .119 if taas bah ang latency. if so try reseting the switch kung mao lang ghapong change lang cable padung sa pc na .119 if still the same try using another switch.

[jouho]

help me plss.


problma ako sa akong Internet connection, akong server using server 2003 for the program.
naa sad ko internet server, separate ang Server for Program and Internet Server.

the Problm is all XP makaconnect cya sa internet using manual configuration sa iyang IP ADD.(static)
but ang Window98, di xa makaconnect sa Internet, pero makaaccess xa both server.
unsa jud ang problma ana?


thnx

[duneman]

try replacing your NIC