Intel Core i7-3770 (3.4G) 8mb 22nm BUILD

[dwarfy]

---

sa PCX, PCQB ug NUTECH ra ko kanbas boss mostly. the rest web ra then I'll challenge myself sa pag pangita

[jipjip810]

ahhh,.. sakay ko ani imu thread bro basig nay maka suggest asa ni makitan nga board hhihi.. slamat!

[kokong]

ahhh,.. sakay ko ani imu thread bro basig nay maka suggest asa ni makitan nga board hhihi.. slamat!

MB extreme 4 imo pasabot try pcx/nab computers 491-81-25/cebu appliance

[dwarfy]

bag.o lang ko naka pa reserve sa PCX boss jipjip next week pa nako makuha kay naa pa manila.

[harhar]

thanks boss mj for your comments. But I have to disagree with not getting an SSD

This is my updated list:

Processor-------- Intel Core i5-3570K (3.4G) 6mb 22nm
Motherboard----- Asrock Z77 Extreme4
Video Card------- MSI N570GTX Twin Frozr II 1.25ddr5
Hard Drive------- OCZ Agility 4 128GB SATA3
Hard Drive------- 1.0TB Seagate Barracuda Sata3
Memory---------- Vengeance® Low Profile — 16GB Dual Channel DDR3 Memory Kit (CML16GX3M4A1600C9)
Optical Drive----- Lite-On 24x IHAS-524 Sata LS/LT
Power Supply---- Silverstone ST60F-ESsentials 600w 80+
Casing----------- Corsair Graphite 600T

Thanks for your feedback and insights mga bossing!
I think this is it. The next challenge will be the availability especially with the casing and memory diri sa pinas
Wish me luck!

PS: This is still open for comments. Mas maau nang daghan tag makat.0nan

The machine is used mainly for graphic design & illustration and a bit of video editing.

Kini nga website Bro dako kaau nig ma tabang sa imung build. Adobe Premiere Pro CS6 GPU Acceleration - Puget Custom Computers

[dwarfy]

mga gurus thank you! indiana jones mode jud ko ganina.hehe

almost there (pero layo pa kaau.hehe)

[jeremyrenner25]

pics nya bro if okay na heheh congratz...

[dwarfy]

puhon boss jer! unya na congrats kung ma porma na jud ni ug mudagan jud.hehe

youtube ug forums mode pa pud ko ani sa pag build. last nako build ug pc 2006 pa

[dwarfy]

question mga gurus:
Planning to buy G.SKILL Ripjaws X Series 8GB (2 x 4GB).
And I'm planning to buy 2 kits of 2 x 4GB. So 16GB in total

On Newegg, someone complained that it is not working and G Skill Support responded "We are sorry to hear you have issues. It is not guaranteed that two kits of memory can operate in a single computer. If you need 16GB, it is necessary to use a 4 x 4GB or 2 x 8GB memory kit for guaranteed compatibility. The two kits you have are only guaranteed as 2 x 4GB, so it is possible to encounter problems if attempting two kits of 2 x 4GB. Also, for that AMD CPU, you may need to raise CPU-NB Voltage +0.1V to stabilize the memory controller. The CPU can be slightly unstable with 4 modules installed. If you would like assistance with this, feel free to contact the G.Skill support team. They will make sure your computer is fast and stable with 16GB of G.Skill memory. "

So stuck diay ko ani sa 4x4GB or 8x2GB kit?
or palit na lang ko ug 4 kabo0k binagsa na 4GB sticks basta same lang jud brand & model?
Or is this only a limitation for G Skill memory?

I know it is already said but maniguru lang ko.

TIA

[kokong]

nindota sa asrock