Motherboard Power Phase Design / Digi Power Design

[boykolotz]

---

Hi iStoryans,

Ania na pud ko karon, mangutana kannyu regarding aning Motherboard, khbaw man jud ta nga ang mga latest Motherboard need na ug power aside sa 24pin power supply.

Scenario: Ni adto ko ug fastwin na pa check sa CPU sa ako ate, akong gi pa diagnose ddto kay kuwang ko ug mga parts sa balay para ma diagnose ug tarung pero naa ko'y idea nga ang guba either power supply or ang mobo, to shorten the story.

Ni kuha ug new mobo ang technician sa fastwin, as far as i remember kita kug 6pin sa mobo duol sa CPU Slot, iya nang gpaslak ang 24pin pero ang 6pin, 4pin ra iyang gi paslak, here's my question "mo buy unta kog new mobo 6pin cya nya ang naa ra ako 4pin, okay ra nga 4pin akong i paslak sa mobo?"

sakto ba ko, kanang Power Slot duol sa CPU Slot kay para sa built-in video? if sayup pasabta daw ko

[werty]

atx 12v power connector man guro na imo gipasabot. its usually 4pin, but some motherboards uses 8pin. dili mu matter even if 4pin ra imo i connect, ang extra 4pin is kinda alternate power route(something) incase for high cpu overclocks.

[phi7ip]

The separate 4 pin ATX 12v that is on your board...

Older computers put most of their load on 3.3 and 5 volts. As time passed, computers drew more and more of their load from 12 volts. Before this power cable was introduced there was just one 12 volt line provided to the motherboard. This cable added two more 12 volt lines so more of the load could be shifted to 12 volts. The power coming from this connector is usually used to power the CPU but some motherboards use it for other things as well. The presense of this connector on a motherboard means it's an ATX12V motherboard. For dual 12 volt rail power supplies, this connector provides the voltage refered to as 12V2. The power cable which plugs into the 4 pin connector has two black wires and two yellow wires. This cable is sometimes called an "ATX12V" cable or "P4" cable although neither of those are technically accurate descriptions.

source: power supply - Is the 4-pin PSU connector required? (Trying to connect a PSU to a mini case.) - Super User
Kihanlan jud ka ug 6-pin boss naa mana adaptor mapalit try lng sa CDR-king

[boykolotz]

So dapat jud d'i kuni paslakan ug 6pin, dle lng kay 4pin. Ahak!!!!!, Necessary jud >.<

[werty]

unsay 6-pin?

[phi7ip]

naa uban mobo nga naay 6 pin
6 pin Motherboard Power Connector Pinout

[boykolotz]

naa uban mobo nga naay 6 pin
6 pin Motherboard Power Connector Pinout

Thank you kaau phi7ip dako kaau kag tabang, para mag pasabot sa akoa.

[COMCAM]

the power connector near the cpu is the power for the cpu. If you are not into overclocking, then the 4pin power supply will do. AMD set up ni?

if I remember it well, the additional 2pins to make it six, 1 wire is yellow (+12v) and 1 is black (ground)

[boykolotz]

the power connector near the cpu is the power for the cpu. If you are not into overclocking, then the 4pin power supply will do. AMD set up ni?

if I remember it well, the additional 2pins to make it six, 1 wire is yellow (+12v) and 1 is black (ground)

Intel Set-up Boss Bem , Okay ra 4pin boss? dle man sad ko mag OC Yes!

[werty]

i've already said it, ok ra 4 pin imo itaud.