Power Supply Calculator

[keropi]

---

: ) sa tinuod lang wala jud koi kalibotan ana overclocking so nag pataka lang ko overclock para lang jud maka kita lang jud ko resulta sa PSU nako so in short ang ako PSU na 600watts ok pa kaayo. . . : )

Depende unsa na nga 600w.. Caution lang..
400w gani ok na kaayo pero depende pud unsa pag-ka 400w nya..

[stealthghost]

Ang result kay mao na ang minimum wattage sa required PSU. Minimum but good enough to support the whole system on 90% load (take note: 90% as default sa choices, dili idle) sa mga components and 0% capacitor aging (based unta on how old is your psu since capacitors lose their conductivity/efficiency by time and they age exponentially). Tong recommended kay probably based on 100% load..If you want to estimate the idle wattage, try setting the load to 10%..

OT: Thanks for the reply bro.. and please see my previous posts, where I mentioned nga karon ra ko kagamit balik og PSU calculator and saw the CPU load especially naka default to 90%.. And I didn't mention any CPU load, but I did said, "standby" or what I truly mean is "IDLE".

let's stop this... Fallacy of quoting out of context - Wikipedia, the free encyclopedia

peace..!

[kokong]

Depende unsa na nga 600w.. Caution lang..
400w gani ok na kaayo pero depende pud unsa pag-ka 400w nya..

im using silverstone sst st60f 80+ bronze (not gold) 3 years na, low-end na PSU piro im sure ok pa kaayo

[keropi]

Basically, ako iset tanan sa 100%
note: regular desktop lang na sya, murag naay explanation didto
only 3 120mm fans
1 vc
2 ddr3 rams
2hdd + 1 ssd
no watercooling
1 dvdrw
overclock ko gamay pero natural oc lang (meaning kung unsa lang makaya sa default voltage, which is around 500-600mhz over stock, so if 3470 ka, mga 4000mhz same voltage)
about 5 usb devices
no pci device
no firewire card
no pcie 1x device
capacitor aging- personal ni nako (5% < 2yrs, 10% 3yrs) japanese grade caps not sure sa ordinary.. pataka lang pud ko


btw: i overclock my vc so i dont select the actual model of my card. i go 1-up..
ug niundang na kog gamit ana. been using that years ago..you can estiamte the psu reqmt manually anyway..

[kokong]

Basically, ako iset tanan sa 100%
note: regular desktop lang na sya, murag naay explanation didto
only 3 120mm fans
1 vc
2 ddr3 rams
2hdd + 1 ssd
no watercooling
1 dvdrw
overclock ko gamay pero natural oc lang (meaning kung unsa lang makaya sa default voltage, which is around 500-600mhz over stock, so if 3470 ka, mga 4000mhz same voltage)
about 5 usb devices
no pci device
no firewire card
no pcie 1x device
capacitor aging- personal ni nako (5% < 2yrs, 10% 3yrs) japanese grade caps not sure sa ordinary.. pataka lang pud ko


btw: i overclock my vc so i dont select the actual model of my card. i go 1-up..
ug niundang na kog gamit ana. been using that years ago..you can estiamte the psu reqmt manually anyway..

hmmm anyways kong mag oc ko i might be calling PM u for info! : ) thx

[keropi]

hmmm anyways kong mag oc ko i might be calling PM u for info! : ) thx

Ayaw kabalaka bro. With just an HD6570 and your procie even clocked @ 5ghz, mongisi lang imong psu ana..