Page 3 of 3 FirstFirst 123
Results 21 to 27 of 27
  1. #21

    Default Re: SLI on a 60hz monitor?


    hehehe... wla gyud mo balik si TS sa thread pud... kani gyud si TS... tsk tsk tsk... basin nag basa pud sya sa mga tubag...

    nangita ko ug explanation para dali masabtan... copy & paste ni from Wiki...


    Flicker due to backlight dimming
    LED backlights are often dimmed by applying pulse-width modulation to the supply current, switching the backlight off and on again like a fast strobe light. If the frequency of the pulse-width modulation is too low and or the user is very sensitive to flicker, this may cause discomfort and eye-strain, similar to the flicker of CRT displays.[3][4] This can be tested by a user simply by waving a hand or object in front of the screen. If the object appears to have sharply-defined edges as it moves, the backlight is strobing on and off at a fairly low frequency. If the object appears blurry, the display either has a continuously-illuminated backlight or it is operating at a frequency that is too high for the brain to perceive. The flicker can be reduced or eliminated by setting the display to full brightness, though this has a negative impact on image quality and battery life due to increased power consumption.



    by the way, ask ko bro crashburn sa current monitor nmo sa SLI set-up... naka 120 Hz ka? if yes, unsa performance sa nvidia 3D vision? thanks
    Last edited by lloyd_joy; 04-28-2012 at 11:23 AM.

  2. #22

    Default Re: SLI on a 60hz monitor?

    Medyo dali raman ko kabantay flicker sa monitor in lower refresh rate... mas maayo jud ang higher, good thing jud kung ang frame rate is at 60....

  3. #23

    Default Re: SLI on a 60hz monitor?

    Nakabantay ko mas ok ang 60hz sa LCD kaysa CRT...

  4. #24

    Default Re: SLI on a 60hz monitor?

    Quote Originally Posted by lloyd_joy View Post
    hehehe... wla gyud mo balik si TS sa thread pud... kani gyud si TS... tsk tsk tsk... basin nag basa pud sya sa mga tubag...

    nangita ko ug explanation para dali masabtan... copy & paste ni from Wiki...


    Flicker due to backlight dimming
    LED backlights are often dimmed by applying pulse-width modulation to the supply current, switching the backlight off and on again like a fast strobe light. If the frequency of the pulse-width modulation is too low and or the user is very sensitive to flicker, this may cause discomfort and eye-strain, similar to the flicker of CRT displays.[3][4] This can be tested by a user simply by waving a hand or object in front of the screen. If the object appears to have sharply-defined edges as it moves, the backlight is strobing on and off at a fairly low frequency. If the object appears blurry, the display either has a continuously-illuminated backlight or it is operating at a frequency that is too high for the brain to perceive. The flicker can be reduced or eliminated by setting the display to full brightness, though this has a negative impact on image quality and battery life due to increased power consumption.



    by the way, ask ko bro crashburn sa current monitor nmo sa SLI set-up... naka 120 Hz ka? if yes, unsa performance sa nvidia 3D vision? thanks
    Ahh, mao diay na imo pasabot sa dimming hehehe. Ok ok...

    60Hz raman ako Apple monitor. I'll try this nya sa ako 55" LED TV if I have the time. 960Hz clear motion man daw, ambot pila ang actual gyud. Also, mag research pako ana'ng nVidia 3D vision, wala ko earth about that LOL!

  5. #25

    Default Re: SLI on a 60hz monitor?

    bro crashburn,

    ah i see... intriga kaayo ko sa nvidia 3D vision gyud... hehehe... wla ko'y ma test dri... gggrrrr... sige pa ko pangita kun naa'y PC shops na nag set-up for show and testing...

    lain ato, atots kaayo, dili ko maka apil2x sa launching sa GTX690... out ko shanghai since yesterday & today... mega gggrrrr... duol ra unta to sa akoang apartment ang mall na ad2 mag launch ang Nvidia sa GTX 690... akoang unang pangita-on gyud unta did2 kun naka visit pa ko kay mo tan-aw ug mag testing sa 3D vision nila... hhhaayyyy

  6. #26

    Default Re: SLI on a 60hz monitor?

    Libog lage ni ako monitor ma set man ug 60 o 75hz. .pero naa man changes ang screen if frm 60 to 75hz mas ma claro ang icons.samsung t190
    19inch lcd 1440*900 max reso.karaan nani

  7. #27

    Default Re: SLI on a 60hz monitor?

    Quote Originally Posted by mcboogle View Post
    Libog lage ni ako monitor ma set man ug 60 o 75hz. .pero naa man changes ang screen if frm 60 to 75hz mas ma claro ang icons.samsung t190
    19inch lcd 1440*900 max reso.karaan nani
    Aw, pasabot ana imung monitor ni ahat ra ug 75hz

  8.    Advertisement

Page 3 of 3 FirstFirst 123

Similar Threads

 
  1. Gigabyte: Enable SLI On X58 Boards
    By jiro in forum Computer Hardware
    Replies: 2
    Last Post: 04-06-2009, 12:35 PM
  2. Need advice on what LCD monitor to buy
    By abayerds in forum Computer Hardware
    Replies: 39
    Last Post: 11-20-2008, 04:12 PM
  3. 2 Inputs on 1 LCD monitor
    By muzikfreakah in forum Computer Hardware
    Replies: 10
    Last Post: 06-24-2008, 12:33 AM
  4. weird thing going on in my monitor
    By shadow in forum Computer Hardware
    Replies: 8
    Last Post: 09-02-2005, 09:12 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
about us
We are the first Cebu Online Media.

iSTORYA.NET is Cebu's Biggest, Southern Philippines' Most Active, and the Philippines' Strongest Online Community!
follow us
#top