PROBLEM: after cleaning GPU. PC won't BOOT. keeps RESTARTNG.

[boyq]

---

SOLVED ALREADY:
















My computer doesn't have any problem beforehand. I cleaned my CPU, MOBO and GPU today because too many dust accumulated already. Until this problem came in.

Here's my CPU spec:

AMD Phenom II X2 555BE
Asrock 880GM-LE
1GB Inno3D Nvidia GTS450 DDR5
2GB Kingston ddr3 RAM
FSP Supersonic 550w 80PLUS

My video card:



Here's the problem:

Power-on self-test (POST) recognizes my GPU.
But right after POST, video card fan makes this very loud spinning noise. It's spinning so fast.
And right after, computer keeps on restarting. I can't boot at all.

Tabang istoryans!
Thanks

Some shots:

Video Card and Heatsink

[vipvip68]

If i were in ur place mao ni ako i-try.

1. Double check power to videocard, if naay lain 12v rail ang psu, try plugging it to that one.
(also double check that power cable connected to the board to power the pci express)
2. Double check the videocard's contact to the motherboard. Basin lu-ag na ang pci express slot.
3. Try installing the card into another pc just to be sure its not the pci express slot
Or
4. Try installing another card into your motherboard to rule out lang nga pci express slot gyud.

If di gyud gihapon this is when i usually start to think about Rma na. What brand imo videocard?
Usually 1 year warranty kasagaran cards. Palit usually has 2 years warranty.

If out of warranty na, try mga hardware level repair shops.... If ur feeling adventurous there's the oven trick.


Good luck!

[dirk14]

Use on board video without the card. If you think the vid card is the problem just make it run just attach ram and hd

[boyq]

If i were in ur place mao ni ako i-try.

1. Double check power to videocard, if naay lain 12v rail ang psu, try plugging it to that one.
(also double check that power cable connected to the board to power the pci express)
2. Double check the videocard's contact to the motherboard. Basin lu-ag na ang pci express slot.
3. Try installing the card into another pc just to be sure its not the pci express slot
Or
4. Try installing another card into your motherboard to rule out lang nga pci express slot gyud.

If di gyud gihapon this is when i usually start to think about Rma na. What brand imo videocard?
Usually 1 year warranty kasagaran cards. Palit usually has 2 years warranty.

If out of warranty na, try mga hardware level repair shops.... If ur feeling adventurous there's the oven trick.

Good luck!

I have tried suggestion 1 and 2. di pa ko katry anang 3 & 4. wala jud ni problema ako videocard beforehand bro. Igo ra ko nanglimpyo sa CPU kay abog na. Until this problem came in.

Use on board video without the card. If you think the vid card is the problem just make it run just attach ram and hd

i'm using the onboard card right now. the video card is the problem.

[zhieg]

unsa na alcohol imo gamit ani sir? dili man ta pwede ang alcohol, pwede raman kng cotton lng or buds imo gamit, nya ang pag remove sa paste pwede raman soft cloth or cotton.. unless u know the content of the alcohol ur using, basin isog ra au na..

by the way sir nag butang kag paste sa imo gpu tapos nag butang nsad kag paste sa heatsink? ang gpu ra butangi sir. ang heatsink na bahala ana mo katag dili baya angay pasobraan ug butang ug paste na..

[kaotep]

dili bitaw recommended ang alcohol kay naay water residue not unless 100% alcohol. suwayi daw og plug-unplug ang vc sa slot. if naa kay blower, i blower ang slot basin hugaw pud.

[boyq]

unsa na alcohol imo gamit ani sir? dili man ta pwede ang alcohol, pwede raman kng cotton lng or buds imo gamit, nya ang pag remove sa paste pwede raman soft cloth or cotton.. unless u know the content of the alcohol ur using, basin isog ra au na..

by the way sir nag butang kag paste sa imo gpu tapos nag butang nsad kag paste sa heatsink? ang gpu ra butangi sir. ang heatsink na bahala ana mo katag dili baya angay pasobraan ug butang ug paste na..

-green cross ako use sir.


-sa gpu chip ra nako gibutang ang thermal paste sir.

dili bitaw recommended ang alcohol kay naay water residue not unless 100% alcohol. suwayi daw og plug-unplug ang vc sa slot. if naa kay blower, i blower ang slot basin hugaw pud.

ah.. hehe. ok di na ko mag alcohol next time bro^^ wala koi blower. manual blower ra jud (tayhop2x)+brush.

[zhieg]

dili man na angay sir.. cotton nlng jud sir or soft cloth nlng jud..

kng scented patay ka, scented alcohols contain perfume oil. oil is an enemy of electronic contacts, no matter how small the quantity.

[Yazbuh]

-green cross ako use sir.


-sa gpu chip ra nako gibutang ang thermal paste sir.



ah.. hehe. ok di na ko mag alcohol next time bro^^ wala koi blower. manual blower ra jud (tayhop2x)+brush.

Naa pa jud moisturizer na moisturize imo GPU hahaha , sa imo unta to kamot gi pahid dili sa PC

[ryan101@yahoo.com]

pwede man ta maggamit alcohol atleast 80% siya....ako bro hilig man sad ko buki2x pero dili sad ko palibi butang alcohol reheat nalang na bro gamite blower......