power supply nga nice ang quality?

[ashrock]

---

...any brand bro, maski mga wala ilhi nga PSU, the key word in here is that "efficiency". So, dapat dako ug efficiency much better. The ideal is 100% would be a perfect PSU.

wala pa na gi himo ang 100% efficiency bro... and aside from efficiency, naa pay laing factors in choosing a good PSU like its voltage regulation rating, Noise and Ripple. Gi himo lang nang marketing hype ang efficiency certification bisan ug dili nindot ug performance ang PSU..

[harhar]

wala pa na gi himo ang 100% efficiency bro... and aside from efficiency, naa pay laing factors in choosing a good PSU like its voltage regulation rating, Noise and Ripple. Gi himo lang nang marketing hype ang efficiency certification bisan ug dili nindot ug performance ang PSU..

Gi unsa nimu pagkahibaw?

[ashrock]

Gi unsa nimu pagkahibaw?

plain & simple..google is your friend...

[keropi]

Sa FSP Aurum 80+ Gold ni Bro nga specs. Nakit-an nako dri Link
230V Internal
Percent Loading and Efficiency
20% = 85%
50% = 89%
100% = 85%

80 PLUS Certification 115V Internal Non-Redundant 230V Internal Redundant
% of Rated Load 10% 20% 50% 100% 10% 20% 50% 100%
80 PLUS --- 80% 80% 80% N/A
80 PLUS Bronze --- 82% 85% 82% --- 81% 85% 81%
80 PLUS Silver --- 85% 88% 85% --- 85% 89% 85%
80 PLUS Gold --- 87% 90% 87% --- 88% 92% 88%
80 PLUS Platinum --- 90% 92% 89% --- 90% 94% 91%
80 PLUS Titanium --- --- --- --- 90% 94% 96% 91%

[harhar]

plain & simple..google is your friend...

Aw, so himu-himu ra diay na nila para mo click? Ga google ko akong nakit-an mga authentic mani. Provide daw ug links para maka hibaw sad ko nga atik-atik ra diay na ang Certification sa PSU's, kung mao na maypa mag Generic PSU nalang ko...

80 PLUS Certification 115V Internal Non-Redundant 230V Internal Redundant
% of Rated Load 10% 20% 50% 100% 10% 20% 50% 100%
80 PLUS --- 80% 80% 80% N/A
80 PLUS Bronze --- 82% 85% 82% --- 81% 85% 81%
80 PLUS Silver --- 85% 88% 85% --- 85% 89% 85%
80 PLUS Gold --- 87% 90% 87% --- 88% 92% 88%
80 PLUS Platinum --- 90% 92% 89% --- 90% 94% 91%
80 PLUS Titanium --- --- --- --- 90% 94% 96% 91%

Thanks Bro sa details...

[keropi]

Ang pasabot nya bro kay, efficiency is one factor but it cannot be the sole basis of a psu's value.

Ex: a 600w psu can get bronze certification even if it only has 40A on the 12v rail..
vs:
a 550w true rated non-bronze with a guaranteed 45A on the 12v..

Which is the better choice?

[ashrock]

Aw, so himu-himu ra diay na nila para mo click? Ga google ko akong nakit-an mga authentic mani. Provide daw ug links para maka hibaw sad ko nga atik-atik ra diay na ang Certification sa PSU's, kung mao na maypa mag Generic PSU nalang ko...

bro, don't take it literally. if you're fond of reading PSU reviews from different review sites then you know. As what ive stated above, dili lang efficiency ang bases if mo palit ka ug good quality PSU kay naa pay laing factors nga i consider.

[KillMe]

Sa FSP Aurum 80+ Gold ni Bro nga specs. Nakit-an nako dri Link

Ingun mangud ka Efficient ang PSU at 50% load kay naa dha ang pinakadako nga power factor. 50% load or 50% percent power factor? Dili mangud na parehas.

Yes sakto ako giingon. This means nga kon naa kay 600W nga PSU, pinakaefficient cya kon ang load nga iya supplyan is around 300W more or less. 50% load jud ako pasabot ana bro.

Dili jud na parehas ang power factor ug load.

Ingun ani unta to Bro imung pagsulti: 80% or greater energy efficient and PSU sa load nga 20%, 50% and 100% nga naay true power factor of 0.9 or greater.

Hehehe... Libog man sab ko aning linyaha bro.

Again, you can only achieve the highest efficiency at 50% load and not at 20% or 100%. So kon maestimate ni TS nga around 300watts ang "average" power consumption sa iya rig (based on the average usage) then he should go buy 600w or 550w but not 850w or beyond. Basin man gud matintal cya sa 850w kay kasagaran raba sa 850w Gold certified raba...It will be an overkill.

For instance naa koy 80+ Bronze PSU so ang specs ana niya below.

Percent Loading and Efficiency
20% = 85%
50% = 89%
100% = 85%

PFC .90 at 50% = Power Factor Correction

So pasagdi ng power factor kay diha rana cya, ang importante kung nag load kag 20% sa PSU kay nag duwa kag solitaire so 85% iyang efficiency.

Sa imong specs, ang 50% nga load kay makaachieve ug .89 nga PF. asa mani gkan imo .90 at 50%? Imo gi round off ang .89?

Ug Bro mas nindut dyud ang Gold kaysa Bronze kay sa price palang daan makita na nimu ang katag...

Hehehe... Of course mahal jud ang Gold certified kay kasagaran ani nila naa naman sa 850w or more ang rating. The higher the wattage rating, the more expensive it will become. Pero if ang average load is naa lang sa 300w, I'd rather buy a 600w Bronze certified kay barato ra then ma achieve sab ang maximum power transfer. Kon SST-ST60F-P ang basehan, makakuha ta ug 87.45% nga PF. Kon SST-ST1000-G (which is Gold cert.) ang paliton para sa 300w nga average load, you will just be throwing cash.... overkill ra kaayo ni para nako then gamay ra difference sa efficiency.

Para dika mag libog please see this 80 PLUS Certified Power Supplies.

Salamat sa pagshare pero kita nako ani sa una bro... Mao sab ni ako gibasehan before ko ni buy sa ako PSU.

[harhar]

Ang pasabot nya bro kay, efficiency is one factor but it cannot be the sole basis of a psu's value.

Ex: a 600w psu can get bronze certification even if it only has 40A on the 12v rail..
vs:
a 550w true rated non-bronze with a guaranteed 45A on the 12v..

Which is the better choice?

Asa kaha ana Bro, libug man...

bro, don't take it literally. if you're fond of reading PSU reviews from different review sites then you know. As what ive stated above, dili lang efficiency ang bases if mo palit ka ug good quality PSU kay naa pay laing factors nga i consider.

Lisud na da atik-atik ug certification then bati ug overall performance.

Yes sakto ako giingon. This means nga kon naa kay 600W nga PSU, pinakaefficient cya kon ang load nga iya supplyan is around 300W more or less. 50% load jud ako pasabot ana bro.

Dili jud na parehas ang power factor ug load.



Hehehe... Libog man sab ko aning linyaha bro.

Again, you can only achieve the highest efficiency at 50% load and not at 20% or 100%. So kon maestimate ni TS nga around 300watts ang "average" power consumption sa iya rig (based on the average usage) then he should go buy 600w or 550w but not 850w or beyond. Basin man gud matintal cya sa 850w kay kasagaran raba sa 850w Gold certified raba...It will be an overkill.




Sa imong specs, ang 50% nga load kay makaachieve ug .89 nga PF. asa mani gkan imo .90 at 50%? Imo gi round off ang .89?



Hehehe... Of course mahal jud ang Gold certified kay kasagaran ani nila naa naman sa 850w or more ang rating. The higher the wattage rating, the more expensive it will become. Pero if ang average load is naa lang sa 300w, I'd rather buy a 600w Bronze certified kay barato ra then ma achieve sab ang maximum power transfer. Kon SST-ST60F-P ang basehan, makakuha ta ug 87.45% nga PF. Kon SST-ST1000-G (which is Gold cert.) ang paliton para sa 300w nga average load, you will just be throwing cash.... overkill ra kaayo ni para nako then gamay ra difference sa efficiency.



Salamat sa pagshare pero kita nako ani sa una bro... Mao sab ni ako gibasehan before ko ni buy sa ako PSU.

Awa lang diha sa link murag kanang 50% Power Factor ana na dyud na cya kasagaran sa 80+ pero sa titanium nahimung 20%...

Diko master sa calculation ana Bro, ako ra gi tanaw ang specs.

[keropi]

Lahi ang power factor sa efficiency bro..