Help mga Experts!! procie problem

[werty]

---

boss, suppose to be compatible ra imo processor sa imo current na motherboard with latest bios, d unta na sya mag blema. asa diay ni dapit inyo bossing? basin duol ra kag capitol im using P5KPL-AM EPU 0501 with support sa imo procie, ato i check imo procie if sugot ka.

ako duda ani is mobo problem or psu(since generics ra imo gamit, bug-at ni ang FSB 1333 for a G31 chipset, nid stable voltages)

try doing these:
-check motherboard for faulty parts like burned areas or bloated caps
-have a premium thermal paste at hand and reseat the northbridge and soutbridge heatsinks(if removable) using fresh coat of premium paste(thoroughly remove old paste/glue thingie)
-reset cmos and load bios defaults

if error japon using ur generic psu, try to test with branded psu.

NOTE: tagsa ra maguba procie, unless overly abused or mishandled...

[HzTStOXA]

another inclined goose solution is version of your boards creates jamming during software installation and that mild repair configuration is little cheap when you decide re-soldered the board's circuitry, hence make sure temps and wattage are sufficient. Blue screen problems blames mostly on RAMS.

[butitoy]

use semi branded PSUs if piso-piso machine ; TRENDSONIC black 600w | 700w with 120mm fans and blue LED

it's reliable brand..mao na gamit here sa opis with c2d e7 | 6 | 4 | PDC 5 |

or branded when personal use..

[orlyboy78]

gi take note unta nimo ang error pag blue screen arun naa ta idea unsa cause sa BSOD

[asobreh]

boss, suppose to be compatible ra imo processor sa imo current na motherboard with latest bios, d unta na sya mag blema. asa diay ni dapit inyo bossing? basin duol ra kag capitol im using P5KPL-AM EPU 0501 with support sa imo procie, ato i check imo procie if sugot ka.

ako duda ani is mobo problem or psu(since generics ra imo gamit, bug-at ni ang FSB 1333 for a G31 chipset, nid stable voltages)

try doing these:
-check motherboard for faulty parts like burned areas or bloated caps
-have a premium thermal paste at hand and reseat the northbridge and soutbridge heatsinks(if removable) using fresh coat of premium paste(thoroughly remove old paste/glue thingie)
-reset cmos and load bios defaults

if error japon using ur generic psu, try to test with branded psu.

NOTE: tagsa ra maguba procie, unless overly abused or mishandled...

okay kaau na imong suggestion bro.. cge man kog anha city so pwede kaau nako dad-on nimu ang processor.. i try sad nako imong gipang sulti bro.. ngita sa kog ma try nako nga branded PSU sad.. Salamat kaayo!! pila imong pangayo boss kung ako ni ipa check nimu?

For Personal Use ra ni akong pc.. nag work ko online pero browsing ra.. gaan ra kaau..

[asobreh]

use semi branded PSUs if piso-piso machine ; TRENDSONIC black 600w | 700w with 120mm fans and blue LED

it's reliable brand..mao na gamit here sa opis with c2d e7 | 6 | 4 | PDC 5 |

or branded when personal use..

Palit na jud ko branded PSU bro next sweldo.. pang ilisan na ni nako.. Thanks Kaayo

[ashrock]

morag gahi man kaayo na gub-on ang processor bro unless i over voltage nimo during OC. basin naay bent pins sa imong board, i check pod daw.

[asobreh]

morag gahi man kaayo na gub-on ang processor bro unless i over voltage nimo during OC. basin naay bent pins sa imong board, i check pod daw.

akong gi tan-aw bro.. naa jud nangahiwi na pin sa socket sa procie.. naglisod man kog tarung kay basin mahiwi ang uban.. saonz.. basin mao ni naka ingun sa?

[Rainerius]

Pang-ilisi na og cable imong DVD og Hard Disk drives

Display driver stopped responding and has recovered <--- this error never goes away for me. If naa ko time mag reformat ko maybe it will fix it.

[asobreh]

gi pang ilisan na ni nako akong mga cable bro.. then more than 5 times nako nag reformat (xp and win 7).. 3 nasad ka HDD akong gisuwayan ani..