help on 2600k

[gyudboy]

ok, bag.o lang nako na taud ang processor and overclocked it to 4.5 ghz with a vcore of 1.38
nya karun taas kaau og temperature 5 mins palang gani ing.ani na...



normal raba ni?
i'm not using the stock cooler pero katong antec kuhler 620
thermal paste akong g gmit kay kaning cooler master high perofrmance thermal compound kit

need your replies jud guys about this

[ren]

Probably your cooler is not sufficient and taas kaayo imong clock.

Try using better coolers and better thermal pastes(arctic silver)

[mE_bytes]

try to check the contact between the hsf and the processor basin dili enough ang pressure.

[makoy105]

try to check the contact between the hsf and the processor basin dili enough ang pressure.

agree ko ani awa lng bro..ka try akong migo ani ni taas au iyang temp kay wa kaau matarong ug hugot ang cooler

[Sasori]

^ taas ra kaayo imu vcore for that oc. try lower it down pod.

[werty]

have you compared your temps @ stock settings?

[gyudboy]

yep, normal rba ning temp sa stock nako?

[gyudboy]

agree ko ani awa lng bro..ka try akong migo ani ni taas au iyang temp kay wa kaau matarong ug hugot ang cooler

ako nang gi usab og taod bro mrag preha rman ghapon

^ taas ra kaayo imu vcore for that oc. try lower it down pod.

mga pla pd ang ma suggest nmo na vcore bro ?

[bytebandit02]

boss, same ta og procie.. wala lang nko g OC for now..

tan-aw nko expected raman na imong temps na ana ka taas coz nka full load ka nya nka OC pajud to 4.5 then imong HSF kay mura entry level ra na watercooling.. kung nka radiator pa cguro na den ubos2x na iyang temps..

try daw post og screenshot kana nka OC then nka idle lang..

suggest pud ko na ayaw daw i deritso og 4.5, try sa daw og 4.0Ghz see if mo ubos ba iyang temps.. also imong ambient/room temp kay mo affect sad na sa temps.. make sure lang pud well ventilated imong lugar..

[gyudboy]

boss, same ta og procie.. wala lang nko g OC for now..

tan-aw nko expected raman na imong temps na ana ka taas coz nka full load ka nya nka OC pajud to 4.5 then imong HSF kay mura entry level ra na watercooling.. kung nka radiator pa cguro na den ubos2x na iyang temps..

try daw post og screenshot kana nka OC then nka idle lang..

suggest pud ko na ayaw daw i deritso og 4.5, try sa daw og 4.0Ghz see if mo ubos ba iyang temps.. also imong ambient/room temp kay mo affect sad na sa temps.. make sure lang pud well ventilated imong lugar..

mao na bro


unsa inyo ma suggest? i want to oc 4.5 ghz
ilis cooler? unsa man