Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1

    Default how to make wrt610n wifi as AP


    mga master, pwede ba ni himo-on ug AP ang wrt610n?

    mao ni existing setup:

    dsl==== router (with wireless) ==== switch === wrt610

    * ang 1st router (with wireless) dili man gud maka penetrate ang signal. daghan walls and liko liko.
    * so extend a utp thru switch and want to put up the wrt610n in the dead spot area.
    * from switch to wrt610n asa e plug? wan port? lan port?
    * if plug wan port, unsay internet settings sa wrt610n? dhcp? ppoe? pptp?
    * if plug to lan port, na i internet ang lan ports sa wrt610n. pero ang wireless wala.

  2. #2

    Default Re: how to make wrt610n wifi as AP

    Good day bro!

    Naka set-up ko ug ingon ani bro peru dli lang wrt610n nga model.

    As far as I know boss, murag dli ma set-up ang wrt610n nga model as AP lang.

    Mao ni akong first choice before but when I talked to a Linksys Tech support, wala daw config ni nga model as AP Only. What I did is that, buy nalang mi ug not so latest nga model E1000. Configure naku as AP Only. From switch plug to Lan Port sa E1000 router.

    Wait boss ha. mag post kog SS sa akong E1000 nga configuration para mahimong AP Mode Only akong router.

  3. #3

    Default Re: how to make wrt610n wifi as AP

    Try daw ni nga config boss.

    dsl==== router (with wireless)(IP 192.168.1.1)(DHCP ON) ==== switch === wrt610 (IP 192.168.1.2)(DHCP OFF).

    *From switch to wrt610n plug it to lan port.
    *Internet settings is DHCP.
    *Configure Router Address - (example. 192.168.1.2)
    *Disable DHCP Server sa imong wrt610n.

    And then save restart wrt610n.

    Let me know boss if this works. Kung dli gani, post kos pics sa E1000 config naku.

  4. #4

    Default Re: how to make wrt610n wifi as AP

    Quote Originally Posted by etgo View Post
    mga master, pwede ba ni himo-on ug AP ang wrt610n?

    mao ni existing setup:

    dsl==== router (with wireless) ==== switch === wrt610

    * ang 1st router (with wireless) dili man gud maka penetrate ang signal. daghan walls and liko liko.
    * so extend a utp thru switch and want to put up the wrt610n in the dead spot area.
    * from switch to wrt610n asa e plug? wan port? lan port?
    * if plug wan port, unsay internet settings sa wrt610n? dhcp? ppoe? pptp?
    * if plug to lan port, na i internet ang lan ports sa wrt610n. pero ang wireless wala.
    naa kay duha ka option:

    1st flash dd-wrt firmware, then you can set WAN to function as a LAN port

    2nd using original firmware, do not use WAN, connect directly to one of the LAN ports

    that's it

  5. #5

    Default Re: how to make wrt610n wifi as AP

    @boss rlcrl: As you can see sa iyang post sir

    "* if plug to lan port, na i internet ang lan ports sa wrt610n. pero ang wireless wala."

    I assumed nga nabuhat na niya ang imong 2nd option which is plug directly sa LAN ports.

  6. #6

    Default Re: how to make wrt610n wifi as AP

    obviously he needs to disable dhcp in wrt610n to make it work

  7. #7

    Default Re: how to make wrt610n wifi as AP

    Quote Originally Posted by etgo View Post
    mga master, pwede ba ni himo-on ug AP ang wrt610n?

    mao ni existing setup:

    dsl==== router (with wireless) ==== switch === wrt610

    * ang 1st router (with wireless) dili man gud maka penetrate ang signal. daghan walls and liko liko.
    * so extend a utp thru switch and want to put up the wrt610n in the dead spot area.
    * from switch to wrt610n asa e plug? wan port? lan port?
    * if plug wan port, unsay internet settings sa wrt610n? dhcp? ppoe? pptp?
    * if plug to lan port, na i internet ang lan ports sa wrt610n. pero ang wireless wala.
    pwede kaayo

  8. #8

    Default Re: how to make wrt610n wifi as AP

    Quote Originally Posted by huryhoy View Post
    @boss rlcrl: As you can see sa iyang post sir

    "* if plug to lan port, na i internet ang lan ports sa wrt610n. pero ang wireless wala."

    I assumed nga nabuhat na niya ang imong 2nd option which is plug directly sa LAN ports.
    pwede gihapon sa wan port nimo i-plug pero lahi na iya subnet... or pwede sad imo enable ang DHCP Forwarder/relay...

  9. #9

    Default Re: how to make wrt610n wifi as AP

    THANKS to all mga master diri.. simple as e turn off lang ang dhcp. bang! lan and wireless works!

    naa koy na think mga master, i don't know unsay term ani na setup sa wrt610n router.

    dsl==== router (with wireless) <======= > wrt610n ===>utp to pc's
    (transmit and receive signal wireless ang wrt then mo distributor to local 1-2 pc's.

  10. #10

    Default Re: how to make wrt610n wifi as AP

    Quote Originally Posted by rlcrl View Post
    naa kay duha ka option:

    1st flash dd-wrt firmware, then you can set WAN to function as a LAN port

    2nd using original firmware, do not use WAN, connect directly to one of the LAN ports

    that's it
    ganahan ko mo suway ta aning ddwrt.. pero hadlok ko mamatay..hehehe

    maybe will give it a try, naa kay link sa latest fw for wrt610n bro? thanks

  11.    Advertisement

Page 1 of 2 12 LastLast

Similar Threads

 
  1. How to make phpmyadmin run as vhost im using xampp with apache?
    By dammy in forum Networking & Internet
    Replies: 5
    Last Post: 04-10-2010, 06:57 AM
  2. Anybody know how to make Lechon Baka?
    By hanex in forum Food & Dining
    Replies: 3
    Last Post: 11-10-2009, 05:48 PM
  3. Replies: 6
    Last Post: 04-15-2006, 10:23 AM
  4. how to make site visible to the webcrawler?
    By shadowkenshin in forum Websites & Multimedia
    Replies: 15
    Last Post: 01-16-2006, 12:45 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
about us
We are the first Cebu Online Media.

iSTORYA.NET is Cebu's Biggest, Southern Philippines' Most Active, and the Philippines' Strongest Online Community!
follow us
#top