print server faq

[wynboost]

---

hello istoryans,

i have a friend naa cya mga 5pc's pa butangan og P.O.S ( point of sales ) and pa network nya ang printserver w/c is a d-link to the main pc...now how does a print server is connected thru all of these?ako nahibaw an is kana rang ordinary connection sa mga internet cafe's?pareho ra ba ni cya? can som1 please tell me unsay paagi sa pag connect ani nla tanan?tnx..wala jud ko earth ani..thank you for replies

[j_opawmd]

Good morning sir,

To setup the printer server, need ka IP address para ana nga print server sir den dapat connected nah sa inyong network, dayon if mo connect ka from client ana need ka mag add ug port (tcp/ip, ang ip sa print server imong gi assign) then install the driver.

ana lng sir.

[noze]

then after you have assigned an IP to that print server, now install the printer



Connect to networked printers

Windows XP

1.) Go to start all programs then double click Printers and Faxes.
or Go to control panel and double click Printers and Faxes.

2.) Right click the inside Printer and Faxes window and click select "Add Printer"

3.) Click next to continue installation.

4.) Select "Local printer attached to this computer"

5.) Unchecked "Automatically detect and install my Plug and Play printer and then click next

6.) Select "Create a new port: Type of Port: and then choose Standard TCP/IP Port.

7.) Click next to continue.

8.) Input the IP address of the print server.
For the port name add "P + the port no. where the desired printer is connected" at the end.

9.) Select the Device Port. Check the cable connection between the desired printer and print
server.

10.) Click finish to accept configuration

11.) You may find the pre-installed drivers. If you can not locate or you have the driver already,
just click Have Disk to browse drivers.

12.) Browse or input the location for the driver. Once located click OK.

13.) Select the appropriate driver for the device and then click next.

14.) You may Keep Existing driver or Replace existing driver.
To make sure corrupted drivers are fixed just select Replace existing driver.
Click Next

15.) If you want the printer to be the default printer then click Yes. Click next.

16.) Click "Do not share this printer. Click Next. Then click finish to accept configuration

17.) Click Yes to test printer. Click next.