Seek professional advice

[arki.gerbz]

---

para sa mobo asrock z68 pro3... kay moa na ako gamit run...
ok mana ang asrock z68 extreme 4, but sa ngon pang boss butitoy, useless ang uban pci-e slots kung di ka mg sli o xfire (dual vcard)...

i'll go for NVDIA cards for this kind of rig...

mao ni ako setup 40+ budget basin pa diay makakuha kag ideas

Proce : i7 2600k (gi)
HDD: 500gb western digital (pcx)
Mem : 2x4gb g.skill 1600 ripjaws x (nulbax)
Mobo : asrock z68 pro3 (nulbax, sa iya ko kakuha kay wai lain gabaligya ani sauna)
Vcard : evga gtx 260 core 216 (jackpot sa buy n sell section)
Cooler : evga superclock cpu cooler (jackpot japun, murag aircon ang noise sa fans, idle @ 37c)
PSU: silverstone 500w (pcx)

hope it helps, kay 3D japun ako tirada...

[butitoy]

nice boss butitoy...nakathink ko nga 3 ka PCIE ang asrock z68 extreme4 and dli kau magamit ang uban ana...ahehe but it's a good board base on newegg.com and tom's hardware review ... ^^

tnx pd sir butitoy i learned something pd sa imo g.post, im not particular much on VC for rendering...im also on 3D rendering field mostly architecture... ^^ tnx sir...

@TS: new MOBO naay asrock Pro3 around 7.4k from dodie...^^ if makakita ka asus maau pd durable... sa krn asrock and asus ako marecommend coz its proven and tested for me... ^^

u're welcome bro..
nindot gyud nuon nga board na z68 xtreme4 if mag SLI + TESLA or Xfire + TESLA or Xfire + Physix | CUDA CARD..not to mention the availability of HDD slots for a REAL Desktop Workstation..

nice work u have.i use adobe ra but, sa haus my humble GT220 makes my Photoshop performance jump because of CUDA and VRAM than it was with HD4650.

[butitoy]

para sa mobo asrock z68 pro3... kay moa na ako gamit run...
ok mana ang asrock z68 extreme 4, but sa ngon pang boss butitoy, useless ang uban pci-e slots kung di ka mg sli o xfire (dual vcard)...

i'll go for NVDIA cards for this kind of rig...

mao ni ako setup 40+ budget basin pa diay makakuha kag ideas

Proce : i7 2600k (gi)
HDD: 500gb western digital (pcx)
Mem : 2x4gb g.skill 1600 ripjaws x (nulbax)
Mobo : asrock z68 pro3 (nulbax, sa iya ko kakuha kay wai lain gabaligya ani sauna)
Vcard : evga gtx 260 core 216 (jackpot sa buy n sell section)
Cooler : evga superclock cpu cooler (jackpot japun, murag aircon ang noise sa fans, idle @ 37c)
PSU: silverstone 500w (pcx)

hope it helps, kay 3D japun ako tirada...

WOW RIG!

congrats sa GTX260.

[ChaosAedes]

Basi sa mga comments and my own research. Nay nag ingon nga Nvidia card is good in particle simulation and render heavy poly counts.. if so kani lang ako vc.

What if mag SLI/CROSSFIRE ko? ma pun.an ba ug fire power akong machine?

Do MEMORY play important part in doin' simulation and render?

And unsa man jud ang pina ka best nga CPU cooler. Kay sa akong lang importante kaayo ni naku kay sometimes ang mga projects kay maabot ug days before mag rendering, mao perme mag init ang cpu. So i need the best if possible naa.

Guys, daghan salamat sa inyo mga advice and comments. I'll adjust my budget nalng para way mahay . Mag upgrade lang ko after ma assemble ni

Proce : Intel i7
HDD: 2x 1T WD1002FAEX
Mem : ?
Mobo : ASRock z68 Extreme4
Vcard : EVGA GTX550Ti
Cooler : ?
PSU: Silverstone 750w

[arki.gerbz]

i'm no professional when it comes to computer hardwares, nakakat-on ra pud ko diri but let me share you my thoughts...

Basi sa mga comments and my own research. Nay nag ingon nga Nvidia card is good in particle simulation and render heavy poly counts.. if so kani lang ako vc.

NVDIA is a good choice

What if mag SLI/CROSSFIRE ko? ma pun.an ba ug fire power akong machine?

partly, dili man mu paspas imu render kung naka SLI/CROSSFIRE ka, paspas lang imu navigation sa viewports, kumbaga dili mag pikit2 kung mg model kag millions of polygons...

Do MEMORY play important part in doin' simulation and render?

YES, mag error ka kung gamay ra imu ram... lack of memory... 8gb ok na, kay ako sauna 4gb error man, di nako ma save ako render

And unsa man jud ang pina ka best nga CPU cooler. Kay sa akong lang importante kaayo ni naku kay sometimes ang mga projects kay maabot ug days before mag rendering, mao perme mag init ang cpu. So i need the best if possible naa.

BEST? mas maayo guro kung i state imu budget sa CPU Cooler alone... basin ang ilang i suggest kay BEAST coolers

Guys, daghan salamat sa inyo mga advice and comments. I'll adjust my budget nalng para way mahay . Mag upgrade lang ko after ma assemble ni

Proce : Intel i7
HDD: 2x 1T WD1002FAEX
Mem : ?
Mobo : ASRock z68 Extreme4 (preparation for SLI?)
Vcard : EVGA GTX550Ti (does it really have to be EVGA?)
Cooler : ?
PSU: Silverstone 750w

[spongbhadz42]

sakto ang ingon ni arki.gerbz...

you need better memory pra dli ka mgproblem sa errors / crashing and have better communication with your CPU, dual channel ang kuhaa....katong suggest nako nga memory sa taas ok na to... ^^ naa pd krn GPU rendering but wala pa ko katry pro kita ko sa videos sa youtube...^^ and aside sa pas2x imong view sa viewport. nice pd tan.awon imo materials and texture sa viewport...there are many type of cooling most common is air cooling / water cooling, if ganahan jd ka bugnaw imo procie kaau water cooling na lng but expensive jd xa... ^^

[street_of_no_return]

Vcard : evga gtx 260 core 216 (jackpot sa buy n sell section)

kani agree ko ani.. hehe

[thewicked46]

30-50k??wala pa na labot sa monitor,optical drive