Informative Guide in Setting up Local Area Network (LAN).

[SteveFoxv2.0]

---

Salamat kaayo sa mga tubag, sir STRANGER!

What i meant sa mga pangutana kay panlitan sa imong procedure-dili ba mas masabtan if butangan nimo ug purpose? Like the purpose of this connection kay for Router/Switch/Hub to Computer then ngano dili Straight Through ang Computer to Computer, etc. Di sad mi ka picture-out kung unsa'y porma sa among LAN. Ma providean ba ug topologies sir? suggestion lang sir. Salamat kaayo sa answers!

[tishop1234]

mga boss pa help lang tana ko
how to set up in ani
2 isp nya 20 ka units computer
bali sa usa ka isp 10 ka units mag da
den sa usa 10 sad
pero the whole 20 ka units magkakita sa as one network
pa help mga bossing...

[gabs]

mga boss pa help lang tana ko
how to set up in ani
2 isp nya 20 ka units computer
bali sa usa ka isp 10 ka units mag da
den sa usa 10 sad
pero the whole 20 ka units magkakita sa as one network
pa help mga bossing...

*change the LAN IP of "Router of ISP1" and "Router of ISP2"
example:
Router1 = 192.168.1.1
Router2 = 192.168.1.254

*then disable DHCP service sa usa ka router. its either router1 or router2. (or you can disable both if you want manual tanan)

*manually assign IP address for the 10 PCs
example: 19.168.1.10, 192.168.1.11, 192.168.1.12, 192.168.1.13, and so on but same Gateway IP of the Router's IP with disabled DHCP service.
example: if you disabled the DHCP service of Router2 which is 192.168.1.254, use its IP for the manually assigned PCs

*then leave other 10 units to be automatically assigned by the DHCP service.

this way you will have 2 gateways within the same network. magkita jud mo tanan if magduwa mo DOTA, counter strike hehe!

[Hitchiker]

great guide.. refreshing sa utok..

[tishop1234]

*change the LAN IP of "Router of ISP1" and "Router of ISP2"
example:
Router1 = 192.168.1.1
Router2 = 192.168.1.254

*then disable DHCP service sa usa ka router. its either router1 or router2. (or you can disable both if you want manual tanan)

*manually assign IP address for the 10 PCs
example: 19.168.1.10, 192.168.1.11, 192.168.1.12, 192.168.1.13, and so on but same Gateway IP of the Router's IP with disabled DHCP service.
example: if you disabled the DHCP service of Router2 which is 192.168.1.254, use its IP for the manually assigned PCs

*then leave other 10 units to be automatically assigned by the DHCP service.

this way you will have 2 gateways within the same network. magkita jud mo tanan if magduwa mo DOTA, counter strike hehe!

thanks sa info bro

[oneshot23]

@TS

sir ask lng ko if sakto bani nga set up for 6 pc. pwede nba waly server^^ i cafe man ni sir gamay lng diri sa probinsya.

modem/router ---> switch--> pc-pc6

thank daan basin ganahan ka sir mag himo sad ug guide icafe setup ^^

[SYMBIANIZE]

Nice one. TS. Informative guide.

[redfox775]

@TS

sir ask lng ko if sakto bani nga set up for 6 pc. pwede nba waly server^^ i cafe man ni sir gamay lng diri sa probinsya.

modem/router ---> switch--> pc-pc6

thank daan basin ganahan ka sir mag himo sad ug guide icafe setup ^^

ok ra na sya bro..

[oneshot23]

ok ra na sya bro..

sir about sa kanang mga security ang kana raman cgurong sa router need og strong password sa para dli maka sulod ang costumers.

[wire]

Sa properties, Migamit ko ug Class C IP addressing. You can also use Class A or B or D, depende na sa inyo. But commonly used is the class A addressing.

Nag-libog jud ko unsa-on bro... Bogo kaaU ug ing-ani... Curious lang...

1. unsa man sad na ang Class A, B, C, and D bro?
2. unsa-on mana nato sila pag-identify and pag-apply?
3. kanus-a na nato sila magamit ang mga Class A, B, C, and D?
4. nganong Class A man ang commonly used?