wont display on monitor.

[lance_pasay]

---

im using a HDMI cable. the other day, okay pman unta to. then pag on nko today, d na cya mu display.


ako g kuha and tried cleaning the video card by using a some sort of blower.
i tried removing a putting back the RAMs.
theres no sound coming out.
then i noticed the motherboard has a red light. (usually it means a bad thing right?)
i also tried the on board graphics sa motherboard then no luck.
i also tried our TV kay i thought na basin sa monitor ni. pro wa japn cya mu display.
i wanted to try removing the HDD and putting it back pro d ko ka salig sa ako self.


ang PSU kaha ang prob ani? pro nag tuyok man tanan fans.

i dont know na what to do. ako nlng ni e pa adto ug shop para repair?

please i need your advice guys. thank you so much.

[akomao]

what imong monitor? bcin na pindutan ang analog button?

[PR0CESS0R]

status sa monitor?

[lance_pasay]

what imong monitor? bcin na pindutan ang analog button?

Samsung BX2250. What do you mean by analog button sir?

[lance_pasay]

status sa monitor?

Mag cge ra cya ug pangita ug source sir.

[akomao]

ohh for that monitor its called auto source button.. try clicking that

[lance_pasay]

I tried sir but no luck.

[Vino Kid]

etry daw ng imo monitor sa lain CPU, sa friend ba kaha

[_hizuka_]

natry na nimo ang builtin video noh pero wala gihapon...
etry ibot ang RAM then paandara kung mobeep ba,... kung dili gani mobeep aw hilot ra ang katapat ana...
first is isaksak balik ang RAM then idot2x ang slot sa video card og sa RAM slot.. mga 7seconds ang paghilot nimo sa ilang duha, then itaod na balik imong casing then iconnect tanan kay surebul moandar nana...

[thanix]

1st try check sa imo mga connection if wala gani try to check ang ram and clean it using eraser,then wala gani japon..2nd ang video card same procedure with the memory if wala ghapon try put it in integreted video(on board video)...,last reset the bios battery and bios jumper(pull out bios battery 5 seconds put it back) sa bios jumper pull it out then put it 2-3 settings in 5 seconds then back to normal setting 1-2 setting...

this steps assuming na imo monitor is no problem mo function jud imo monitor kana makita lng nmu na no signal ang monitor...