No Display in Monitor

[roughneck86]

---

hmm ask lng ko kung ang RAM ba ang guba sa ako pc, kay ig "ON" nq sa power PC wala man mo display sa monitor.. i mean wala jud ni boot up..

thnx..

ug ask n lng pud ko kung asa pa naay namaligya ug DDR 400 kay mao na ako RAM need 1GB.

[j.alob]

no beeps bossing.?

[roughneck86]

ala pud bossing..hilom ra jud kaayo.

[jodencio]

sir what monitor do you have? lcd or crt? if its lcd try pointing a flashlight on the screen. if the lcd bulbs are defective you will still see the operating booting up. as for crt if it has a on light it could be that your crt is defective.

another solution i do to check is remove the memory from the motherboard to check the beep sounds. if it beeps then the error beeps are good. reinsert it and remove the monitor cable. try booting up the computer and then check if the hdd leds are blinking or reading up. if this is the case then the monitor is busted.

[jakeneuman]

unsay led status niya?

[roughneck86]

@jake
orange boss

@jodencio
lcd sir... ako try ang kuha ang RAM..ning beep, then balik nq ala ni beep pro ala gihapon display..
morag dili man tingali LCD kay kung ako tang tangon ang LCD mo display man ug "NO SIGNAL" sa lcd.

and no blinking. static ra nga ga siga..and no sound.

[roughneck86]

any help? aron mapaliton nq daun.

[j.alob]

any help? aron mapaliton nq daun.

nasulayan na nimo bagnis ang memory ug eraser?
ug
reset cmos

[jodencio]

@jake
orange boss

@jodencio
lcd sir... ako try ang kuha ang RAM..ning beep, then balik nq ala ni beep pro ala gihapon display..
morag dili man tingali LCD kay kung ako tang tangon ang LCD mo display man ug "NO SIGNAL" sa lcd.

and no blinking. static ra nga ga siga..and no sound.

sorry i don't quite understand bisaya. does it boot on the bios or just the no signal? try getting another video card or just reinsert your video card. if so i think your video card is busted.

if it boots on bios. try doing the safe mode. sorry really. i'm lost.

[roughneck86]

nasulayan na nimo bagnis ang memory ug eraser?
ug
reset cmos

yes sirala japon..

sorry i don't quite understand bisaya. does it boot on the bios or just the no signal? try getting another video card or just reinsert your video card. if so i think your video card is busted.

if it boots on bios. try doing the safe mode. sorry really. i'm lost.

no its not booting in bios coz it has no display at all no boot sound and my video card is built-in..

hmm btw how can i check if it really my video card is damage and "NOT" the RAM coz its is built-in video card. ?