Black Border when using HDMI cable on my Samsung Syncmaster PX2370 LED Full HD

[siopao1984]

---

mao jud ni ang dili ko ma gets

specs:
MONITOR - SAMSUNG Syncmaster PX2370 FULL HD LED
VIDEO CARD - HD 5670 1 GB GDDR5 / HDMI / DISPLAY PORT / DVI
CABLES - HDMI Cable 5 meters / DVI Cable 3 meters

RESOLUTION is constant at 1920 x 1080

ok so here's my dilemma guys
hope you could help me out

1st setup
from video card HDMI port ->>> HDMI to DVI cable adapter ->>> DVI cable ->>> monitor DVI port
RESULT: everything is occupied on my screen

2nd setup
from video card HDMI port ->>> HDMI cable 5 meters ->>> monitor HDMI port
RESULT: slightly smaller... will not occupy the whole screen

if wala mo kasabot ingani cya (disregard the resolution na labels ky sample pic ra na)




kung hdmi cable naay black borders
kung dvi cable occupied tanan na portion sa screen

ako ni pang check every setting sa monitor... its not helping out
resetting it does not resolve as well

dapat unta mo stretch gyud ang image until the LCD bezel / frame like this below



any idea guys? thanks

[CARLOtech]

basin sa setting na nimo bro sa ang 23" kay 2048 x 1152 mana na resolution..baliktad sa akoa kay 22 akong lcd kong set nako sa 2048 x 1152 kay molapas sa screen...

[long4short]

basin sa aspect ratio sad bro...

[siopao1984]

basin sa setting na nimo bro sa ang 23" kay 2048 x 1152 mana na resolution..baliktad sa akoa kay 22 akong lcd kong set nako sa 2048 x 1152 kay molapas sa screen...

ang highest resolution that the monitor could display is 1920 x 1080 sir

the resolution is left at constant value

[siopao1984]

basin sa aspect ratio sad bro...

dili pod aspect ratio

[werty]

i'll try get back with u on this... naa ni dapit sa input settings sa monitor if i remembered correctly( i think wala naman siguro ma configure ani sa computer/software side since pure native resolution man ang outpit sa dvi/hdmi ports)

EDIT:
hmm saup ko sa comments nako sa taas dah. anyways this link below might help. something to do with catalyst overscan
http://www.xpmediacentre.com.au/comm...ol-centre.html

[siopao1984]

i'll try get back with u on this... naa ni dapit sa input settings sa monitor if i remembered correctly( i think wala naman siguro ma configure ani sa computer/software side since pure native resolution man ang outpit sa dvi/hdmi ports)

thank u sir... yes correct ni cya... sa monitor jud ni cya na settings.... dili ni sa software side...

[werty]

ako gi edit ako previous post.. heheheeh check it out daw...

[siopao1984]

salamat kaau sir... sa scaling ratio diay



what a relief... whew!

[siopao1984]

before using scaling options


after using scaling options