sorry if wrong post ko... unsaon pg disable sa chkdsk nig start up? pls help!!!
![]()
sorry if wrong post ko... unsaon pg disable sa chkdsk nig start up? pls help!!!
![]()
Last edited by xen_lex; 10-20-2009 at 11:02 PM.
naa problema sa imog windows file.bcn na corrupt..e reformat na ug re instal ag windows...kug mu gawas gihapon ag chkdsk pasabot ana naa guba u hard disk.
DEFINITION:
- One of Windows annoying so called “feature” is CHKDSK being automatically being run whenever you don’t shut down your computer properly. You get the blue colored screen that says “Checking file system on C: The type of the file system is NTFS. One of your disks needs to be checked for consistency. You may cancel the disk check, but it is strongly recommended that you continue. To skip disk checking, press any key within 10 seconds(s).
![]()
Simply pressing any key would stop CHKDSK from running but when you restart your computer, you’ll get this prompt again. Sometimes even after letting CHKDSK scan the drive that it wants to, CHKDSK would still automatically run at next boot! Here’s how to disable or stop CHKDSK at Windows bootup.
PROCEDURE:
1.There are some people suggested to edit the registry but the proper way to disable CHKDSK from starting up is using the /x switch on chkntfs command in command prompt. The /x switch will exclude a drive from the default boot-time check. If you have drive C: as your hard drive, then the command to disable chkdsk from scanning C: drive would be:
chkntfs /x c:
2. If you have 2 drive, C and D, you can disable chkdsk with the command below: chkntfs /x c: d:
3.Try to restart the machine, checkdisk utility should not be seen anymore.
btaw bro, or try insert bootable cd then dos ka and type chkdsk /r or /p.
basin madala pa... ug repairtype chkdsk /r or /p.
saun ra na oi.. pg.full scan error checking o checkdisk.. unsa nga drive letter nka chkdsk? stage 3 ra taman chking?
-right click sa drive letter o hard disk nga nka chkdsk nya "properties"
-choose "tools" nya naay error checking
-"check now" dn check na duha (2) ka box daun click na "start"
-stage 5 na taman.. p.abota lng nga mcomplete
fyi
qng naay mo pop-up nga mgparestart e rstart lng.. qng wla maau
Click on 'Start', then 'Run' , type in cmd
Once you are on the black screen, type:
chkntfs /x c:
Note: If your computer has an additional hard drive, for example the drive D: then on the same black screen, type:
chkntfs /x c: d:
Doing the provided steps will modify the windows registry in order to prevent the CHKDSK utility from scanning your hard drive/s.
Hope this helps, thank you!
suwayi sa ni bro .click start=run=type cmd=then type chkdsk c: /f /r (ilisi lang ang drive ug unsa na drive tan-aw nmo unsa dprensya) then press enter then press y and restart.automatic repair sa bad sectors na.
Similar Threads |
|