1. Pwede ba ni sa akoang karaan nga P4 casing?
pwede basta ATX form factor... mu fit ang mobo
2. Kaya kaha ni akoang daan nga PSU trendsonic 600 watts gamiton?
kaya pero if mag butang ka ug daghan fan, cooling, overclock or hi end na videocard maglisod...
try lng buy ug HEC Cougar na 700watts... i think tag 4k+ xa.... use this to calculate ur PSU power need:
eXtreme Power Supply Calculator v2.5
3. Maayo ba if DDR2 1066 RAM 2x2gig akoa gamiton? Unsa maning SLI ready sa RAM?
Every RAM man is ready for a SLI rig... ang RAMS na naay SLI certification just means it's tested on SLI configurations... and the rams are sure not to bottleneck/limit the rig when run on SLI... pero if you have a ram with 1066Mhz and CL5 timings (5-5-5-15)... im sure d na ma bottleneck... just set it right sa imo mobo
4. Ganahan ko 9800GTX 512mb 256 bit DDR3 nga VC, kaya kaha ni sa akoang PSU? Kaya kaha ni if mag crossfire ko? [crossfire ready ang kini nga mobo]
im not sure if kaya kung usa ka 9800GTX... i think 1 card like that draws 200watts max... so if duha i think 200x2=400watts is on the safe side, wa pa labot ang procie and etc.... but nonetheless you always really need a good powersupply if you plan to run it on crossfire... it's a must... everyone's doing it... if you can afford 2 VC's then don't skimp on that crucial component or else you'll regret forever...
5. Dagan kaha ni og games karon bsag wa pko kapalit og VC? Naa daw ni mobo ready graphic card nga ATI HD 3300 128mb?
yup... HD3300 is one of the most powerful ONBOARD VC that can play decent games... like COD4, COD5, DMC4 and many online games but must be set on low settings... if maxed out... frame rates will suffer to the point that it's barely playable anymore. If you want you can use your onboard VC then upgrade later when your budget allows... basin naa pa nya bag.o mu gawas or mu barato sila right? like sa HD4770...
6. Kaya kaha ni akoang PSU if gamitan nko og coolermaster V8 hsf? Ganahan ko di na butang og daghan auxillary fan kay abog kaayo ato CPU ana.
kaya rana provided:
1. gamit ka onboard VC
2. moderate overclock... less than 30% increase in stock speed
3. you have less PC components... 2 FANS, 1 HD, 1 Optical Drive and little to no external drives
4. no overclocking sa RAMS...
not sure sa taas if na maximize ba pero im sure that when those conditions are met, is SAFE.
7. Plano pud nko gamitan oh WD HDD 500gig nga naay 32mb? Unsa manang naay 32mb sa HDD oi, wa ko balo ani, naay 16mb pud?
HD Cache na sila... used to prefetch HD data. their are very many definitions on thinks like that on google... try searching... on the other hand. a 32mb 500gig HD has little difference on a 16mb 500gig HD... cost to performance wise... pero improvements are great when seen on 1TB+ HDs
8. Asay maayo sata I or sata II nga HDD? unsa maning mga sata oi?
Actually to be honest, more or less thesame rajud na cla... Why, you say na 3.2Gbps man ang SATAII interface dba? it wont really matter because BOTH drives are still mechanically limited... meaning, both spindles are running at 7,200rpm which still bottlenecks the 3.2Gbps interface provided by SATAII and but fortunately IDE interface still can catch up with those speeds... unless your are using 10k rpm drives then that's a different story. Benefits of SATA would be its features like ease of use in RAID... and availability... IDE are to be phased out and the SATA variants of HD are generally cheaper... so generally, i would go with SATA for future proofing, features and newer technology.