Custom made guitars vs bought guitars

[piogolf]

---

im gonna buy a gibson or epiphone les paul soon, but i heard that in edz, they make custom les pauls with the same wood and ed has an actual gibson les paul and blue prints of the les paul. have one made or just buy?

[Wowowow]

made nalang siguro bai
ang brand new ana kay mahal kaayu compared to the custom made in edz

[Pi2plank]

btw, the new les pauls (axcess standard) have contoured necks for upper fret access.. similar to that scalloped lower horn of herman li's signature ibanez (egen) guitar, i think this is a cool feature specially for shredders.. check it out, Spotlight On the Les Paul Axcess Standard

[bryanarzaga]

im gonna buy a gibson or epiphone les paul soon, but i heard that in edz, they make custom les pauls with the same wood and ed has an actual gibson les paul and blue prints of the les paul. have one made or just buy?

just because they have mahogany it is the same as the mahogany used by gibson..gibsons are long tenon set necks,

gibsons are not like epiphone's, (even the trussrod is different), also you need to have good quality flame maple top, unless your just trying to copy the LP studio

buying a ready made one is has its advantage(epiphone ra), kai dli naka mag hasul2x ug spec-ing out the guitar

@Pi2plank

contour'd neck joint area and lower horn are two different things, also i think the egen cut for the lower horn is copied from a suhr

the carved neck joint area is more comparable to the old 1980 neck joint routing on the body or the caparison

[archnacorda]

if you can afford an original then go buy an original. there are a lot of les paul copies out there and Edz makes a very decent one with hardware to match your budget. but if you are always going to compare it with the original then get the original.

[seven_segment]

if you got the money...buy the Original...


but if you're in a tight budget, go for the custom made...

as long as you got the specs and your materials are on military standards...

mura ra sad original imo LP...hehe..

[Brennsky]

asa diay na edz? ask lang ko kay la man ko katultul

[idontno]

mandaue as fortuna ang street bai,

[bryanarzaga]

if you got the money...buy the Original...


but if you're in a tight budget, go for the custom made...

as long as you got the specs and your materials are on military standards...

mura ra sad original imo LP...hehe..

mao lagi kung naa kwarta palit sa inyo gusto, kung pareho mu nako na walay pake it doesnt matter as long na ang build is solid, pud and the end product is worth the cost,

here's a quick demo of one of my prs copies with Belcat Alnico 5 pickups

YouTube - 'Give Me a Riff Competition' - The Monkey Call

[jfox]

if you got the money...buy the Original...


but if you're in a tight budget, go for the custom made...

as long as you got the specs and your materials are on military standards...

mura ra sad original imo LP...hehe..

ngiga sah.,military standards man jud......