Tungod kay kapoy ug huwat sa gathering, or pangita ug ka duwa, so I decide to purchase LP-8187e Wireless Lan USB Adapter, and additional 3mtrs of USB extension, kay ako e butang sa gawas ang USB nako for access point (wifi hotspot).
ang Xlink, mura rapud ug Garena, XLink Kai is a program that you run on your PC or Macintosh that allows you to play system-link / LAN-enabled games for your XBox, Playstation 2, Gamecube and PSP.
The software is referred to as what is known as a 'tunnelling' application. There are various other single-console tunnelling applications available, but XLink remains the only one to support all 3 major consoles...
Requirements:
- LP-8187e with Realtek RTL8187 chipset
- Sony PSP
- PC
- Xlink Kai Evolution Download Xlink Kai Here
- Sign Up for Xlink Kai Here
- Internet Connection.
Installation and Setup Guide:
Setup (PSP)
Switch on your PSP without a game in and select "Network Settings".
Select "Ad Hoc Mode" and choose "1CH".
Now restart your PSP and start your game.
Setup (PC)
Plug your LP-8187e USB to USB Port
Install Driver, from Driver CD.
1. Load up
Network Connections from your
Control Panel.
2. Right-Click your "
Wireless Network Connection" and then select "
Properties".
3. Here, (I've removed unnecessary Protocols - may not make any difference) - select "I
nternet Protocol" then click on "
Properties"
4. Enter an IP address from a private range (10.0.0.x or 192.168.0.x - "x" being 1 to 254 making sure no other devices are using that IP) and give the subnet of "
255.255.255.0" and click "
OK"
5. Now, click on "
Wireless Networks" tab then Select "
Advanced"
6. Select "
Computer-to-Computer (ad hoc) networks only" and "
Automatically connect to non-preferred networks" and then close.
Setup REALTEK RTL8187 Wireless LAN Utility
1. Switch on your PSP first, then choose your game and go to Lobby network (example MHFU online Gathering or Tekken Battle Lobby).
2. Open REALTEK RTL8187 Wireless LAN Utility from your desktop.
3. Click on "Set Wizard(s)" and "select Station (ad hoc)"
4. It will detect your PSP
5. Click your SSID "
PSP_XXXX" and Click "
Next", "
Unsecured Network" will pop-up and Cick "
OK".
6. On "
Wireless Network Properties" Click "
Ok".
7. Just follow everything on "
Set Wizard" and Click on "
Finish"
8. If successfully configured you can see this activity from your
General Tab.
9. Select on "
Advance" Tab and Enable "
PSP Xlink Mode". This is the reason why I choose this cheap CDRKing WiFi USB Device, because it can support Xlink features.
Setup Xlink Kai
1. Install Xlink Kai, after installation then Start Kai,
Start>All Programs>Xlink Kai> Start Kai
2. It will ask you for KaiTag and Password, Just click "
Configure Xlink Kai"
3. Now under Network Adapter Click it and change it to "
RealTek RTL8187 Wireless ..... "
4. Next Make sure you put a check mark in the Follow
PSP SSID check box.
5. Yours should look like this (except for the XTag And Pass).
6. On your system try rick click the "
XLink Kai" Icon and Select "
Launch UI"
7. And Login your Xlink Account.
8. And we will see this screen.
9. Now let's Diagnose the connection. take a look at the Kai Diagnostics panel within Kai (you must press the

icon, then the

icon). And you will see this screen.
10. Now let's check the Arena and Select "
PSP" console.
11. And select your Category, ex. Monster Hunter select "
Action"
and scroll down to game tittle, "
Monster Hunter Freedom Unite"
Select "
English Speaking"
select your "
HR/Class"
and you will see some List of Rooms, just join any vacant rooms like 3/4, room is full if 4/4
Once you are inside the room you will see this screen, and check your Lobby and you will see the players. (Players name in Game is different from Xlink Names)
See my PSP Screen Shot.
Ahak na lingaw ko ug duwa wa ko ka bantay lowbat na diay psp hahaha
Enjoy!!!!








----------------------
FAQ
Games List
XLink Kai: Evolution VII. Global Network Gaming.